Need unlock HP elitebook 830 G6

[viji90]

Need unlock HP EliteBook 830 G6

Hello
can you please unlock bios password?
SN:5CG01512WT

[chinh]

HP Elitebook 830 g6 Endpoint Security Controller Problem

Serial number 5CG0100SB7
Mb Code CATALONI- 6050A3022401 - MB - A01 (A1)
Attached is the main bios and ec

[hoaca388]

HP Elitebook 830 g6 Endpoint Security Controller Problem

Serial number 5CG0100SB7
Mb Code CATALONI- 6050A3022401 - MB - A01 (A1)
Attached is the main bios and ec

Where ?

[chinh]

Where ?

help

[hoaca388]

help

XXX

[chinh]

XXX

Is there a source that doesn't show up on the screen?

[Jeremymk7]

Hey ! Can somebody help me ? I read the 16MB chip, put it in RC Unlocker, everything fine. But the PW still exists... I read the 32MB too but dont know what to do with it. From reading here, i think somebody has to unlock both ? And can i let my already unlocked 16mb chip in or do i need to Program them both and then start her up ?

Here are the Files: *************
Sorry,
SN: 5CG9422G10
MB: 6050A3059101-MB-A01 (A1)

[SMDFlea]

Hey ! Can somebody help me ? I read the 16MB chip, put it in RC Unlocker, everything fine. But the PW still exists... I read the 32MB too but dont know what to do with it. From reading here, i think somebody has to unlock both ? And can i let my already unlocked 16mb chip in or do i need to Program them both and then start her up ?

Here are the Files: *************
Sorry,
SN: 5CG9422G10
MB: 6050A3059101-MB-A01 (A1)

Post attachments directly to your post. Read https://www.badcaps.net/forum/troubl...before-posting

[Jeremymk7]

re: Sorry !!


Hey ! Can somebody help me ? I read the 16MB chip, put it in RC Unlocker, everything fine. But the PW still exists... I read the 32MB too but dont know what to do with it. From reading here, i think somebody has to unlock both ? And can i let my already unlocked 16mb chip in or do i need to Program them both and then start her up ?

Here are the Files
SN: 5CG9422G10
MB: 6050A3059101-MB-A01 (A1)

[rex98]

re: Sorry !!


Hey ! Can somebody help me ? I read the 16MB chip, put it in RC Unlocker, everything fine. But the PW still exists... I read the 32MB too but dont know what to do with it. From reading here, i think somebody has to unlock both ? And can i let my already unlocked 16mb chip in or do i need to Program them both and then start her up ?

Here are the Files
SN: 5CG9422G10
MB: 6050A3059101-MB-A01 (A1)

only flash this main do not touch the EC.
first boot press f10 apply factory defaults and restart, 2nd boot reset security settings to defaults and exit.
after following my instructions. flash back the original main and it's good to go.

[Jeremymk7]

Thank you ! And its not locked again after I flash it Original ?

[Jeremymk7]

Still the pw… it bootcycles 3-4 times with fan at 100% and black screen and then comes the message „The BIOS was recovered from internal bla bla“ and PW still exists…

[Jeremymk7]

This is what it shows then

[tigertec]

Hello,
I have an HP eLitebook x360 830 G6
Has power on password
S/N: 5CG92965TF

[rex98]

Hello,
I have an HP eLitebook x360 830 G6
Has power on password
S/N: 5CG92965TF

only flash this EC

[ingenieroedu]

Hello,

Recently an HP EliteBook 830 G6 computer with a bios problem started looking for it, I found the trash but when programming I got the error: HP Endpoint Security Controller Problem, could someone help with this, I have attached the failed files and the functional one
HP EliteBook 830 G6
sn# 5CG9270XJL
Motherboard number: CATALONI 6050A3022401 MB A01 (A1)

[peste]

merged post...

[nuevomorfeo]

Need unlock HP EliteBook 830 G6
please unlock bios password?

SN:5CG9426QVJ

I tried a Dump that gives me an image but I am left without audio and it gives me "Endpoint Security Controller Problem"

thank you so much

[hoaca388]

Need unlock HP EliteBook 830 G6
please unlock bios password?

SN:5CG9426QVJ

I tried a Dump that gives me an image but I am left without audio and it gives me "Endpoint Security Controller Problem"

thank you so much

RC unlocker for W25Q128JV

[nuevomorfeo]

RC unlocker for W25Q128JV

I don't understand what you mean, do you need me to do something more than send the files previously sent?

[nuevomorfeo]

I understood that I had to put my W25Q128JV through the RC Unlocker program, I learned how to do it with a video that another user uploaded in the forum but I get that error message that appears in the image

Can someone help me please??