Dell Latitude 5500 Bios password

[hmaidax]

Hello. Can sameone delete my bios password?
Dell 5500
LA-G901P

[rex98]

Hello. Can sameone delete my bios password?
Dell 5500
LA-G901P

upload the 8mb bios
and your service tag

[alexeyb43]

hi guys! I need your help, there is a block to change settings in the BIOS (asks for a password)
motherboard compal la-g901p rev1.0
service tag GNB1P13
I am attaching my original dump, please unblock it

[volinakis]

hi guys! I need your help, there is a block to change settings in the BIOS (asks for a password)
motherboard compal la-g901p rev1.0
service tag GNB1P13
I am attaching my original dump, please unblock it

try

[hoaca388]

hi guys! I need your help, there is a block to change settings in the BIOS (asks for a password)
motherboard compal la-g901p rev1.0
service tag GNB1P13
I am attaching my original dump, please unblock it

Unlocked

[whosrdaddy]

Hi
Can a genius help me to remove the bios password please?
DELL Latitude 5500
DGZSM33-8FC8
MB : LA-G901P Rev :1.0 (A00)
Version with 2 bios chip
Both dumps in archive (from Winbond 25Q64JVIQ en 25Q128JVSQ)

Thanks in advance

[Markus1741]

Unlocked write only the 8MB chip back

[whosrdaddy]

A genius! ;-) thanks

[techrecycle]

hi everyone,

needs to unlock bios password ,fie attached

ST: 862NZW2
DELL LATITUDE 5500

[volinakis]

hi everyone,

needs to unlock bios password ,fie attached

ST: 862NZW2
DELL LATITUDE 5500

there's another bios chipset, read that one too. I think is marked as UC6 on board.

[Bowayne]

Can someone help me with a bios please, attaced is the dump uc5 8mb and uc6 16mb - black screen , fan spins , keyboard backlight but no response.
Dell Lattitude 5500
Service Tag : FD381X2
Board LA-G901P EDC50

[hoaca388]

Can someone help me with a bios please, attaced is the dump uc5 8mb and uc6 16mb - black screen , fan spins , keyboard backlight but no response.
Dell Lattitude 5500
Service Tag : FD381X2
Board LA-G901P EDC50

Latitude 5500


Service Tag: FD381X2

[Bowayne]

Thank you but not working, no display

[nacerhamza]

plz remove password dell 5500

Service Tag : J8CW8Y2
Board : EDC50 LA-G901P

[SMDFlea]

Try the Dell 8FC8 patcher https://www.badcaps.net/forum/troubl...23#post1622423

[ddhlawi]

I have dell latitude 5500 password can one help me
C.M : EDC50 LA-G901P Rev :1.0(A00)
S.T: 9N8L453

[SMDFlea]

https://www.badcaps.net/forum/troubl...90#post3540390

[LBTT1121]

I have dell latitude 5500 password can one help me
C.M : EDC50 LA-G901P Rev :1.0(A00)
S.T: 9N8L453

Hi, Try

[brock-s]

Requesting help making a clean un-corrupted bios.
I have a Dell Latitude 5500 with motherboard EDC50 LAG902P Rev 1.0.
It's suspected that a BIOS update was interrupted.

Attached are dumps of the two BIOS chips (Gigadevice GD25Q80 and GD25B256D). Also attached is the most recent BIOS from Dell in exe format and the most recent BIOS recovery file in rcv format from Dell.
Hoping someone can make a functional BIOS from the machine-specific data in the dumps and the functional BIOS from Dell.

[SMDFlea]

Read the updated rules sticky thread. Post the service tag.

[Markus1741]

Hello try ...

[brock-s]

Thank you! I appreciate the time you took to help with this. The laptop symptoms are the same however, so this apparently rules out corrupted bios update. (For reference, the symptoms are: When plugged in, the power light comes on white. Then, pressing the power button causes the light to add an amber tint to it but no signs of life from the laptop.)

[Justice88]

I am in need of assistance making changes to the boot priority on a Dell Latitude 5500.
A friend of mine gave me his laptop which began blue screening a few months ago, and now upon powering on the system, it is indicating that there is no bootable device.
I suspect it would be a somewhat simple fix to get a new nvme drive and swap them out, if I am able to change the boot priority to a flash drive to install Windows.
Alas, the password in the bios has got me stuck, and I need assistance in acquiring my golden ticket in the form of the bios administrator password.
The service tag viewable in the BIOS is 4M1ZM13-8FC8.

I did take a look at the 8FC8 patcher but I am under the impression that I won't be able to utilize that since I am not able to boot into Windows currently.
Feel free to point me in the right direction if my assumption is incorrect - I am new to tinkering with premanufactured systems/laptops and the hurdles they put in the way, so excuse my ignorance.

Thank you