Hello everyone,
I have a problem with a Dell Latitude 5500 laptop I bought last week from a local website, the seller told me it was password protected but the price was good so I bought it. I turned it on and of course it has a master password so I searched the net for solutions and identified the bios chip which is Winbond 25Q256JVEIQ and I desolder with the hot air station all good and well I read it with the programmer I have an EZP2023+ SPI Flash which for me is ok for now just that I only read it once I saved it twice in two different locations although I knew I had to read it 2- 3 times and compare it with HxD but I simply forgot, I found a password unlocking patch and did it, when I installed it back in place surprise the laptop won't boot, I installed the original bios back in place and still nothing. When I reinstalled the bios for the second time I noticed that a small resistor is missing which is connected with leg 3 of the bios I looked for the schematic or boardview but I couldn't find anything , only something similar where it appears to be a 49.9ohm resistor I soldered it but still nothing, please help me.
laptopul este Dell Latitude 5500
motherboard EDC50 LA-G901P, REV. 1.0(A00)
Service Tag 3CP5YYYY2
EXPRESS SERVICE CODE 7298210090
Thanks in advance!
Here original bios
I have a problem with a Dell Latitude 5500 laptop I bought last week from a local website, the seller told me it was password protected but the price was good so I bought it. I turned it on and of course it has a master password so I searched the net for solutions and identified the bios chip which is Winbond 25Q256JVEIQ and I desolder with the hot air station all good and well I read it with the programmer I have an EZP2023+ SPI Flash which for me is ok for now just that I only read it once I saved it twice in two different locations although I knew I had to read it 2- 3 times and compare it with HxD but I simply forgot, I found a password unlocking patch and did it, when I installed it back in place surprise the laptop won't boot, I installed the original bios back in place and still nothing. When I reinstalled the bios for the second time I noticed that a small resistor is missing which is connected with leg 3 of the bios I looked for the schematic or boardview but I couldn't find anything , only something similar where it appears to be a 49.9ohm resistor I soldered it but still nothing, please help me.
laptopul este Dell Latitude 5500
motherboard EDC50 LA-G901P, REV. 1.0(A00)
Service Tag 3CP5YYYY2
EXPRESS SERVICE CODE 7298210090
Thanks in advance!
Here original bios
Comment