mec 16xx dump with info block

[AAAC]

Re: mec 16xx dump with info block

Yeap, they are named "pogo pins".

[RethoricalCheese]

Re: mec 16xx dump with info block

Keyboard connector is easier to use in some cases No need to solder anything except that one resistor.

[black0hackers]

Re: mec 16xx dump with info block

this pins

where i can buy it?

[zomi]

Re: mec 16xx dump with info block

which one works better, more reliable rt809 ?

or is the svod3 just as good, keyboard connector sounds so good..

[RethoricalCheese]

Re: mec 16xx dump with info block

When it comes to the keyboard connector, it doesn't matter if you use rt809 or svod3. That cable you need to make yourself anyway.

[zomi]

Re: mec 16xx dump with info block

thanks :-)

[RethoricalCheese]

Re: mec 16xx dump with info block

Who here even uses SVOD3 and can successfully unlock all thinkpads with it? What's the secret? Thus far it seems just as bad as SAS JIG when it comes to that.

[keczuk]

Re: mec 16xx dump with info block

Keyboard connector is easier to use in some cases No need to solder anything except that one resistor.

Do you use this adapter for rt809h for programming via keyboard ??::

https://www.eliptor.pl/index.php?p10...-rt809f-simple


if not please send what did u use.

[RethoricalCheese]

Re: mec 16xx dump with info block

No. I took some random flex from some random HP laptop, attached it to some random project board that had that same connector connected to pin header and used jumper wires to connect it to programmer. So it's totally diy.

I guess that adapter board would work aswell but not sure.

[evserv]

Re: mec 16xx dump with info block

Yesterday there was an update for the programmator: "Vertyanov" which can read and write the eeprom area.

https://www.vss.store/magazin/product/programmator

Now you do not need to erase the entire firmware and you can edit only the eeprom area.

You can download it from here:
https://drive.google.com/file/d/1cWB...ew?usp=sharing

[zomi]

Re: mec 16xx dump with info block

Which programmer works best just about to buy one

1. svod

2. rt809h

3.Vertyanov

which is most consistent and trouble free

thanks

[RethoricalCheese]

Re: mec 16xx dump with info block

Out of those 3, only rt809h has worked fine for me... Until somebody who owns a svod finally tells me how they use it to unlock lenovos...

[evserv]

Re: mec 16xx dump with info block

Out of those 3, only rt809h has worked fine for me... Until somebody who owns a svod finally tells me how they use it to unlock lenovos...

Of these, only the programmer Veryanov can read and write eeprom, this is the DMI block where the password is stored.

[zomi]

Re: mec 16xx dump with info block

@evserv have you used one to unlock a Lenovo ?

[evserv]

Re: mec 16xx dump with info block

@evserv have you used one to unlock a Lenovo ?

programmer Vertyanov yes used

[zomi]

Re: mec 16xx dump with info block

Also
Anyone cleared the password on a x1 yoga 4th gen or x1 carbon 7th gen ?
using this method..

thanks

[RethoricalCheese]

Re: mec 16xx dump with info block

Of these, only the programmer Veryanov can read and write eeprom, this is the DMI block where the password is stored.

Too bad it's difficult to buy the original but it's easy to buy the copy. And I guess it's not possible to just buy the software license to use vertyanov software with the copy board.

[evserv]

Re: mec 16xx dump with info block

Too bad it's difficult to buy the original but it's easy to buy the copy. And I guess it's not possible to just buy the software license to use vertyanov software with the copy board.

Today I spoke with the author at your request ...
Anyone can activate a clone of the programmer through the author of the programmer Vertyanov and make the programmer licensed. It will work with the latest software version 8.2 which can work with the eeprom area. The activation cost is $ 50.

[imranromi]

Re: mec 16xx dump with info block

Too bad it's difficult to buy the original but it's easy to buy the copy. And I guess it's not possible to just buy the software license to use vertyanov software with the copy board.

Now not difficult to buy original.i just order yesterday.i have also Sas copy programmer but copy is copy not work like original.

[evserv]

Re: mec 16xx dump with info block

Now not difficult to buy original.i just order yesterday.i have also Sas copy programmer but copy is copy not work like original.

Everyone understands that the original is the original!
This is news for those who might want to activate their clone so they can work now.
Once activated, the clone will work just like the original.