Need unlocked Zbook 15 G5 BIOS, dump enclosed

[Fst1]

post the laptop serial number, read the rules..

it is : reading from the Bios 5CD9227FXW from the back door different 5CD8522X45, thnx so much!

[Fst1]

it is : reading from the Bios 5CD9227FXW from the back door different 5CD8522X45, thnx so much!

Hi friend, do you have any news?

[bbanana]

Hi friend, do you have any news?

First, flash your orginal 16mb bios with password, complete boot.

Dont remove the RTC battery, reflash this unlocked 16MB bios!
if security end point still exist, post your 32MB bios here.

[SMDFlea]

Hello, I need a help. I removed second bios chip from mb and programmed with your second bios dump. It is working without bios password, but I have a another problem now. After changing it I get "there is a problem with the Endpoint security controller on this device". And I can not disable it or remove. I put old bios image back but it is again with bios password I send to you my original second bios bin. May be can you help me with unlocking it? Many thanks

For the endpoint error patch the 32MB main bios, you can do that yourself, see post 1 & 18 in this thread--> https://www.badcaps.net/forum/troubl...security-error

[Fst1]

For the endpoint error patch the 32MB main bios, you can do that yourself, see post 1 & 18 in this thread--> https://www.badcaps.net/forum/troubl...security-error

Hi, thank you for your job! Unfortunatelly i have still problem with "endpoint" error. I tried that you sent to me me link but I get Script error. Here is my main bios 32mb .Thanks again.

[lapfix]

Hi, thank you for your job! Unfortunatelly i have still problem with "endpoint" error. I tried that you sent to me me link but I get Script error. Here is my main bios 32mb .Thanks again.

Try and Give Feedback

[Fst1]

Hi friend, everything is working fijn! It is getting manifacturing mode. I had also old bios config text and replaced with the new config text. At this time everything is okay Thanks a lot!!