I need the HP zbook 17 g5 DUMP BIOS, thank you.

[amiralipay]

Hi

My bios error endpoint
Plz fix


SN:

5CD926C7CY


Tnx

[hoaca388]

Hi

My bios error endpoint
Plz fix


SN:

5CD926C7CY


Tnx

error endpoint

[Francisco.s]

Hi, need bios for HP ZBOOK 17 G6 DA0XW3MBAH0 REV H

It makes boot loop but no imagen, with win + esc keys, it tries to read the pendrive, but pendrive stops blinking for a few seconds and loops again.

Seems not to be any bios for this motherboard, but many for DAXW3EMBAF0.

Serial number: 5 C D 9 4 4 9 J V D

Thanks for your help.

[peste]

post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

[hoaca388]

Hi, need bios for HP ZBOOK 17 G6 DA0XW3MBAH0 REV H

It makes boot loop but no imagen, with win + esc keys, it tries to read the pendrive, but pendrive stops blinking for a few seconds and loops again.

Seems not to be any bios for this motherboard, but many for DAXW3EMBAF0.

Serial number: 5 C D 9 4 4 9 J V D

Thanks for your help.

HP ZBook 17 G5 Mobile Workstation

[Francisco.s]

HP ZBook 17 G5 Mobile Workstation

Thanks hoaca388, this bios works!!!
Now this laptop has video and boots from ssd or usb. Can't believe it. I have tried many dumps and none of them worked till now.
I shows an error now about Endpoint Security, but this seems easy to solve.

[SMDFlea]

Posts moved to G5 thread from G6.... .Try to post in the correct thread please....

[kevin_23]

Good morning and delighted to be part of this community, I have purchased an old business laptop, a HP ZBook 17 G5 system model with the Intel(R) Xeon(R) E-2176M CPU @ 2.70GHz, 2712 Mhz, 6 main processors, 12 logical processors, BIOS version and date HP Q70 BIOS version and date Ver. 01.29.01, 09/24/2024 SMBIOS version 3.1, the BIOS is password locked, I cannot access the BIOS to change parameters, my question is if in this model the BIOS can be unlocked without having to open the laptop or on the contrary, do you have to solder or something? Thank you very much

[peste]

post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

[AHSAN TARIQ]

Good morning and delighted to be part of this community, I have purchased an old business laptop, a HP ZBook 17 G5 system model with the Intel(R) Xeon(R) E-2176M CPU @ 2.70GHz, 2712 Mhz, 6 main processors, 12 logical processors, BIOS version and date HP Q70 BIOS version and date Ver. 01.29.01, 09/24/2024 SMBIOS version 3.1, the BIOS is password locked, I cannot access the BIOS to change parameters, my question is if in this model the BIOS can be unlocked without having to open the laptop or on the contrary, do you have to solder or something? Thank you very much

no bro is if in this model the BIOS can be unlocked open the laptop or on the contrary, yes you have to solder or something like desldering a chip and you nedd programmer to re write a bios

[kevin_23]

no bro is if in this model the BIOS can be unlocked open the laptop or on the contrary, yes you have to solder or something like desldering a chip and you nedd programmer to re write a bios

Thank you for the information, it's a shame, I don't dare to desolder, thank you.

[kevin_23]

no bro is if in this model the BIOS can be unlocked open the laptop or on the contrary, yes you have to solder or something like desldering a chip and you nedd programmer to re write a bios

I've opened the cover and found the BIOS chip and the EC chip. If I buy the WSON8 8x6 and SOIC8 chips, what should I do next? Isn't it too inconvenient? Can I do it without soldering, or does this PC have an option with WSON8 8x6 and SOIC8 chips?

[peste]

I've opened the cover and found the BIOS chip and the EC chip. If I buy the WSON8 8x6 and SOIC8 chips, what should I do next? Isn't it too inconvenient? Can I do it without soldering, or does this PC have an option with WSON8 8x6 and SOIC8 chips?

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

post S/N, full name and model, motherboard model, product number,etc.

[kevin_23]

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

post S/N, full name and model, motherboard model, product number,etc.

I have no idea how to solder or desolder, I would ruin it. With clip is possible?

[peste]

I have no idea how to solder or desolder, I would ruin it. With clip is possible?

you can charge whatever your laptop is..

[kevin_23]

you can charge whatever your laptop is..

Forgive my insistence, it may be very tedious, but with the programmer and the clip without having to use a soldering iron, do you think it would be possible or is it impossible? With WSON8 8x6 and SOIC8 chips, the bad thing, I don't see any tutorial without having to solder.

[huzo]

Can someone repair mine ? SN 5cd011j00b

[arber1232]

Hi everyone i need bios for HP 17 G5 problem is turn off in update .
Sn: 5cd9132xk8
this is backup main and ec

[peste]

Hi everyone i need bios for HP 17 G5 problem is turn off in update .
Sn: 5cd9132xk8
this is backup main and ec

bios extracted from HP website update for HP ZBook 17 G5 Mobile Workstation

[arber1232]

not working laptop not tun on .With old ec and your new main bios laptop turn on but not display fan spining fast. i find on main bios laptop turn on and work ok but whwn i turn off laptop restarting and me not updatet error89688

[MilzderPilz]

Hi, i need help with the BIOS for HP Zbook 17 G5. S/N: 5CD9053DM2

The laptop starts up on its own with no display output and the fans spinning at full speed; eventually, it reaches the "Protected by HP Sure Start" screen, but then nothing else happens. If I take a BIOS from here and flash it, the Caps Lock light flashes 7 times and nothing happens. I adjusted the serial number using a hex editor. Here are the original BIOS and EC dumps.
Thanks in advance

[Sparo]

Hi, i need help with the BIOS for HP Zbook 17 G5. S/N: 5CD9053DM2

The laptop starts up on its own with no display output and the fans spinning at full speed; eventually, it reaches the "Protected by HP Sure Start" screen, but then nothing else happens. If I take a BIOS from here and flash it, the Caps Lock light flashes 7 times and nothing happens. I adjusted the serial number using a hex editor. Here are the original BIOS and EC dumps.
Thanks in advance

Hi, your backup/read is corrupted. Use this small tool
Follow the instructions > https://www.badcaps.net/forum/troubl...55#post3863055

[MilzderPilz]

Hi, your backup/read is corrupted. Use this small tool
Follow the instructions > https://www.badcaps.net/forum/troubl...55#post3863055

Unfortunately, I only have that one backup. The laptop boots up now, though only when connected via LAN and I was able to update the BIOS, but the startup behavior hasn't changed yet.