Razer RZ09 Bios

[auszylow]

Hello everyone. CAN YOU PLEASE HELP ME WITH MY VBIOS ?😟😟 Thanks in advance for any advice

I wrote a post a week ago with all details

[SMDFlea]

Hello everyone. CAN YOU PLEASE HELP ME WITH MY VBIOS ?😟😟 Thanks in advance for any advice

I wrote a post a week ago with all details

A vBios was posted by George Barn yesterday https://www.badcaps.net/forum/troubl...04#post3749904

[auszylow]

Hello everyone. I tried flashing my vbios chip Winbond 25Q16JWNIQ but I get this error every time. The chip is connected correctly. Please help!

[SMDFlea]

Hello everyone. I tried flashing my vbios chip Winbond 25Q16JWNIQ but I get this error every time. The chip is connected correctly. Please help!

The chip is 1.8V , do you have a 1.8V adapter ?

[auszylow]

Yes , I have use 1.8v adapter , flashed succesfully butGeorge Barn upload wrong file I think :/ Can someone check mine please?

[SMDFlea]

https://www.techpowerup.com/vgabios/...emSize=&since=

[auszylow]

Yes , I know this website but there is .rom files , my vbios is .bin file . I'm confused but definitely I desoldered correct chip

[SMDFlea]

Yes , I know this website but there is .rom files , my vbios is .bin file . I'm confused but definitely I desoldered correct chip

rename rom to bin

[auszylow]

Size is different .rom file is 976kb , mine is 2mb

[SMDFlea]

Size is different .rom file is 976kb , mine is 2mb

That`s right. The file should be padded out to 2MB using a hex editor. Post the file

[Stepan21]

Good day,
Laptop model: RZ09-03519G11
CPU: i7-10750H
GPU: GTX 1660 Ti
Mainboard: MBPGR5MP6A-AN10, OL510-MB PTV V1.0
Embedded Controller: IT8390E-256, EC flash: 25Q64CSIG

There’s an issue with power-on — the PWRBTN# signal (controlled by the EC) gets stuck. This signal is managed by the EC firmware itself.
If anyone has a working BIOS and EC dump, or could help correct my dump, I’d be very grateful, since I haven’t been able to find one publicly available.

[kjosmofon]

need help, razer laptop rz09-0370cea3 mb pi411_MB V4.0 SN by2120m40402808
i have voltage 3.3 on IO controller and 3.3 on power key but laptop dont power up, only take 1ma current
i check for shorts and all lines are ok, i hope is bios problem, here is sn and old bios, thanks

[baiceanu_stefan]

need help, razer laptop rz09-0370cea3 mb pi411_MB V4.0 SN by2120m40402808
i have voltage 3.3 on IO controller and 3.3 on power key but laptop dont power up, only take 1ma current
i check for shorts and all lines are ok, i hope is bios problem, here is sn and old bios, thanks

Hy, I have the same problem with a razer RZ09-0483seje apf22002_mb mb2 mp2 v4.0 serial number BY2334N34900766. ATACHING MY DUMP maybe somenone can check it/help

[danito]

Hy, I have the same problem with a razer RZ09-0483seje apf22002_mb mb2 mp2 v4.0 serial number BY2334N34900766. ATACHING MY DUMP maybe somenone can check it/help

try

[SMDFlea]

need help, razer laptop rz09-0370cea3 mb pi411_MB V4.0 SN by2120m40402808
i have voltage 3.3 on IO controller and 3.3 on power key but laptop dont power up, only take 1ma current
i check for shorts and all lines are ok, i hope is bios problem, here is sn and old bios, thanks

What you posted is the 8MB EC backup. The bios is 16MB ,there is a full bios image at Razer support - https://rzr.to/ymagCg ,extract it with 7-zip or WinRAR to a folder. The bios is named P1106.rom

[kjosmofon]

What you posted is the 8MB EC backup. The bios is 16MB ,there is a full bios image at Razer support - https://rzr.to/ymagCg ,extract it with 7-zip or WinRAR to a folder. The bios is named P1106.rom

thanks ill try, first time i have Winbond W74M12 chip, ill try with generic 25 series chip, i hope they dont use lock keys on this chip, i have xgecu and rt809 programmers

[ngvuanh]

Hello,
I am working on a Stealth 13, rz09-0310.
The symptom is, the board has 3.3v rail when plugged in. When I press power button, 5.0v rail comes up for a few seconds and the down to 0v. I see 64Mbits flash next to EC chip and 128Mbits flash next to CPU.
I am not sure if this is due to bios issue or something else.
I hope someone can help, thanks.
Model RZ09-03102E52
SN BY2021A89204598

[peste]

Hello,
I am working on a Stealth 13, rz09-0310.
The symptom is, the board has 3.3v rail when plugged in. When I press power button, 5.0v rail comes up for a few seconds and the down to 0v. I see 64Mbits flash next to EC chip and 128Mbits flash next to CPU.
I am not sure if this is due to bios issue or something else.
I hope someone can help, thanks.
Model RZ09-03102E52
SN BY2021A89204598

first check that you don't have a short on the 5v rail..or another rail..

[ngvuanh]

first check that you don't have a short on the 5v rail..or another rail..

Thanks for response. I just checked and found chipset part on CPU overheated after I press power button. I guess the board is crooked now. I just don't want to spend for a new cpu.