Razer RZ09 Bios

[Claudiomfa]

Re: Razer RZ09 Bios

My programmer can't read or write that chip. I think it needs more voltage that the 3.3v it uses. Here is the datasheet for U49.

what programmer do you have?

[scarabson]

Re: Razer RZ09 Bios

what programmer do you have?

This CH341a programmer is what I have

[Claudiomfa]

Re: Razer RZ09 Bios

This CH341a programmer is what I have

I think that your programmer supports this chip. you can use the AsProgrammer software and select mx25l1006e. this chips is 3.3v

[scarabson]

Re: Razer RZ09 Bios

I think that your programmer supports this chip. you can use the AsProgrammer software and select mx25l1006e. this chips is 3.3v

Yeah that's what I've been using but I cannot get the chip to read. I have selected the correct chip from the dropdown menu but still no luck.

[Claudiomfa]

Re: Razer RZ09 Bios

Possibly your chip may be dead. You can use chip MX25L8006E if you have one in stock

[scarabson]

Re: Razer RZ09 Bios

Possibly your chip may be dead. You can use chip MX25L8006E if you have one in stock

I don't have soldering equipment or the skills to do it myself. I'll probably need someone else to repair it.

[Claudiomfa]

Re: Razer RZ09 Bios

I don't have soldering equipment or the skills to do it myself. I'll probably need someone else to repair it.

The best way is to take off the chip and programming them outside of the board. This is your problem for the programmer not detecting the chip

[scarabson]

Re: Razer RZ09 Bios

The best way is to take off the chip and programming them outside of the board. This is your problem for the programmer not detecting the chip

Thanks for your help, I think I'll just have to wait and let someone more knowledgeable than me repair the computer. I'm not very experienced with this type of work and I don't want to damage the board trying to de-solder any chips. I was hoping I could just reprogram them with the test clip but it seems that is not enough.

[wantas]

Re: Razer RZ09 Bios

Hello,

did anyone have a BIOS Dump for RZ09-03135? I must to reflash my Bios and EC...

[qayyum786]

Re: Razer RZ09 Bios

hello,

did anyone have a bios dump for rz09-03135? I must to reflash my bios and ec...

chck post #1 and #6 posted by smdflea

[SMDFlea]

Re: Razer RZ09 Bios

Hello,

did anyone have a BIOS Dump for RZ09-03135? I must to reflash my Bios and EC...

Here, click on the link in the pdf to download the bios, then extract the exe using 7-zip or winrar .The full bios is in the extracted folder .

https://cdn.badcaps-static.com/pdfs/...c2651e044b.pdf
http://drivers.razersupport.com//ind...&nav=0,350,933

[joutrade]

Re: Razer RZ09 Bios

hello, after install and rewrite the charlotte bin file on razer 15 rz09-2886 , the laptop work find but can not recognize the graphic card, the serial number neither the SKU in the bios page. any idea how to make it read the serial and graphic again ? I have noticed that the serial is there in the emc chip but still can not read it from the bios page. any idea?

[qayyum786]

Re: Razer RZ09 Bios

hello, after install and rewrite the charlotte bin file on razer 15 rz09-2886 , the laptop work find but can not recognize the graphic card, the serial number neither the SKU in the bios page. any idea how to make it read the serial and graphic again ? I have noticed that the serial is there in the emc chip but still can not read it from the bios page. any idea?

if you have your original backup than post here some one will fix it

[joutrade]

Re: Razer RZ09 Bios

Thank you. file attached ( original bin )

[joutrade]

Re: Razer RZ09 Bios

Quote:
Originally Posted by joutrade View Post
hello, after install and rewrite the charlotte bin file on razer 15 rz09-2886 , the laptop work find but can not recognize the graphic card, the serial number neither the SKU in the bios page. any idea how to make it read the serial and graphic again ? I have noticed that the serial is there in the emc chip but still can not read it from the bios page. any idea?

if you have your original backup than post here some one will fix it

Sorry, File has been attached again

[SMDFlea]

Re: Razer RZ09 Bios

Quote:
Originally Posted by joutrade View Post
hello, after install and rewrite the charlotte bin file on razer 15 rz09-2886 , the laptop work find but can not recognize the graphic card, the serial number neither the SKU in the bios page. any idea how to make it read the serial and graphic again ? I have noticed that the serial is there in the emc chip but still can not read it from the bios page. any idea?

if you have your original backup than post here some one will fix it

Sorry, File has been attached again

The bios you posted is from an Alienware 15 R2 (P42F002)

.

[joutrade]

Re: Razer RZ09 Bios

The bios you posted is from an Alienware 15 R2 (P42F002)

.

Thank you for reply. The bios has been taken of razer 15 2019 . it has been dismantled by myself and it is defiantly not an Alienware. but whatever do you have any idea how to solve that. razer or Alienware. !?

[SMDFlea]

Re: Razer RZ09 Bios

Thank you for reply. The bios has been taken of razer 15 2019 . it has been dismantled by myself and it is defiantly not an Alienware. but whatever do you have any idea how to solve that. razer or Alienware. !?

Check the motherboard part number, "C2_MB FCS V4.0" .If thats what it is then try the 02886 bios at post #6 .

[SMDFlea]

Re: Razer RZ09 Bios

Quote:
I have noticed that the serial is there in the emc chip but still can not read it from the bios page. any idea?

Post this "emc" chip backup. Does the serial match the one on the case ?

[joutrade]

Re: Razer RZ09 Bios

Yes the serial in the EC match the one on the case