my fault, bin size was 12 bit to big and it somehow messed it up. Tried other bin now i got into the bios. Wrong Model and Serial Nummer but its booting into bios so far.
-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
So after i found out my read with the clamp was faulty I found another one with the same Modelnumber. Now its working with a other Serialnumber. Does somebody know Where in the Bin can I find the serial to change it? Best Regards
Comment
-
Hi. I need the password for:
CF-54CU005E2
5JTCA29484
ThanksComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..
you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Greetings. I have one panasonic cf-54 mk2 with locked bios. After the fill with 00 field after amitsesetup, the bios unlocks, but I have a problem with charging the battery and recognizing the capacity. If someone can unlock this bios for me in some other way than the classic deletion of the field under amitsesetup, I would be grateful. Here is the bios dump:​Comment
-
Greetings. I have one panasonic cf-54 mk2 with locked bios. After the fill with 00 field after amitsesetup, the bios unlocks, but I have a problem with charging the battery and recognizing the capacity. If someone can unlock this bios for me in some other way than the classic deletion of the field under amitsesetup, I would be grateful.
Here is serial number: 9ATCC02984
MODEL NUMBER: CF-54EY147TG
ORIGINAL bios dump:​Comment
-
hey guys i need hgelp i reset passwort myself but but my panasonic cf 54 dont boot anymore.
can anybody check my file?
Model: CF-54DY024NG
S/N: 6DTSA61616Comment
-
Hello
I removed the BIOS password thanks to the help of one of the friends of this forum.
https://www.badcaps.net/forum/troubl...61#post3637661
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but... -
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello,
I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).
But today it's not accepting my password. I'm %100 sure i'm entering the correct password.
I'm trying to reset my bios without success.
I tried :
-I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries... -
Hi, i have a Panasonic Cf-W5 with the bios password, I tried remove cmos but problem didnot solve.
I uploaded the picture after remove cmos battery, It look like this is a Phoenix bios. The bios dump file in the link i attached
Please help me remove bios password.
Thank you so much -
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set....
Comment