try
Perhaps there's still something hidden, I have my doubts
-
Can you modify my file ? This solution is not convenient for me.Thanks for your effort !Leave a comment:
-
Leave a comment:
-
Could someone help me delete password on this MK2 CF54?
Model NO : CF-54D0005NG
SERIAL NO : 6KTCA99439Leave a comment:
-
Hi, can somebody unlock bios password please ?
Panasonic cf-54
CF-54F1556KM
8CTTA14998Leave a comment:
-
-
Open the bios with a hex editor, such as HxD ,do a text search for the serial number or the word asset tag .In that block is the DMI with the model number, serial number. Change text in the right hand side column. The DMI block is usually at the start of the bios region, open the bios with UEFITool ,the region starts after the ME firmware/Gbe firmware
.Attached Filesif you find these attachements useful please consider making a small donation to the site
Leave a comment:
-
-
Hey Bro I’m not sure if this is the right place to ask, but can anyone change the model and serial number on a CF-54 for me? I’m a bit stuck and really need this device.
Leave a comment:
-
Leave a comment:
-
Hi i need help with bios password
Panasonic CF 54
Model NO cf-54cy003en
serial 5jtca30945Leave a comment:
-
Hello
I removed the BIOS password thanks to the help of one of the friends of this forum.
https://www.badcaps.net/forum/troubl...61#post3637661
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but... -
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello,
I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).
But today it's not accepting my password. I'm %100 sure i'm entering the correct password.
I'm trying to reset my bios without success.
I tried :
-I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries... -
Hi, i have a Panasonic Cf-W5 with the bios password, I tried remove cmos but problem didnot solve.
I uploaded the picture after remove cmos battery, It look like this is a Phoenix bios. The bios dump file in the link i attached
Please help me remove bios password.
Thank you so much -
Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
Leave a comment: