I think DIS GRF has a problem, I removed PLV1 and PLV2 and unsoldered PJW2 (dramrst) to disable dis grf, but no voltage on PLG1. Can anyone tell me this is a good method to convert (M.B: DKL50 LA-E802P Rev: 1.0) to uma
-
-
Hi everyone - this board has been so resourceful for me! I didn't think I'd ever have to flash my BIOS, but here we are.
Model 15-bs143tu
S/N: CND8073FP0
ProdID: 3EV30PA#ABG
Board model number: DKL50 LA-E802P REV 1.0
BIOS chip: 25Q64JVSIQ
Perhaps I got lucky - perhaps the bin data isn't correct - but I struck gold on my first attempt with the CH314a programmer without the need to reseat, and attached is the saved data.
Really appreciate the support with this!Comment
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Any donations to badcaps are welcome, click this link to donate. Thanks to all the supporters----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Thank you so much!! Now for the painful part..... reassembling this laptop where for the life of me, I don't understand why the BIOS chip is on the back of it!
I'm still overwhelmed by the support shown by users on this forum - it's honestly greatly appreciated. It's not much, but I've donated what I was able to part with
Thanks again!
Comment
-
hi every body , i have HP Notebook - 15-bs115dx
p/n= 3MP69UAR#ABA
S/N= CND8077FWR
15-BS115DX
black screen after bios update:
if please, can anybody help meComment
-
there is something wrong happened during desolder, because i restored my old bios, but all i get is 5 long and 3 short badcaps, here is the picture if someone can determine what i have done incorrectlyAttached FilesComment
-
-
Try, BIOS extracted from HP website with serial/win key inserted
HP Notebook - 15-bs115dx
BIOS ver. F.75
BID 08328
S/N CND8077FWR
DMI 210000-21103FComment
-
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If... -
Hi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble... -
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello,
I have a Lenovo Thinkbook 15 G2 ITL i5 Laptop (serial number: MP2BFZEF) that when I turn it on, the led on the power button lights up for 5 seconds, then goes out. There's no display and nothing happens.
So I thought it was a Bios problem.
I found 3 bios chips on the board, which I read with a bios programmer: two XMC model bios chips and a Winbond model bios chip. Each XMC model bios chip has two partitions named XM25QH128A [3.3V] and XT25F128A [3.3V]. And the Winbond model bios chip has three partitions named W25Q80BL 3.3V, W25Q80xV 3.3V and W25Q80DV 3.3V....
Comment