Anybody can help me please i tried reflash back to original main and ec nw laptop has no power bu ill checked power rail voltage is there present any advise please i need to solved this problem thanks in advance
I have the same problem with this model i flashed the main laptop turns on but no display but when i flashed the ec bios given here laptop nw is dead no led light but voltage is present could it be ec problem?can somebody please advise or share working ec for this model please
I optained the file for LG C500 Pegatron H46Y rev 2.1 from Another website and proven to be working according tp replies. Check if you have the same model as above. The model name is given as file name inside RAR file. If your MB has Another name/ rev then it won't work. How did you flash the EC??
Would recommend trying another bios chip and flash it with a known good programmer.
Thanks for the response tibd at first i flashed the main with your file laptop turns on automatically fan spinning fast but no display after that i flashed the EC with your file because the same size with my original 64kb i flashed with miniprotl886cs programmer and soldered back when i plugged in laptop nw no power and led lights.it is possible the ec problem?i checkex the motherboard is the same with your file H46y rev 2.1.
I had a pair of these 25q32 failing. they seemed to be programmable but never worked, changing them revived the MBs, just a though that it might be so but very hard to say. As i mentioned the dumps are not from som device i own but from a very good website that i never had problem with.
Thanks again for the reply ill try to find w25q32 chip if ever i could not find this what is the replacement for this that working also?can i replace mxic?thanks again
Comment