Could really use help getting this dump DAX1BDMB6F0 REV:F
-
-
Re: hp 15-an050nr bios
I have been able to extract the file from hp original execution file with all the different BID numbers. Could be of use to someone. all are 100% working. -
Re: hp 15-an050nr bios
how to remove manufacture mode is in unlock mode ?
080a0 tested ok but got that stupid message :/
thxComment
-
Comment
-
Re: hp 15-an050nr bios
thx !!! finally mystery solved
Comment
-
Re: hp 15-an050nr bios
Here is a DAOAX2MB6F0 dump which I have set a new Intel ME section. Flash and go. BIOS is in chinese. Just change the language in the BIOS settings. I could not find a recent enough version of the DMI tool to set the serial. This BIOS has a serial number on it.Comment
-
Re: hp 15-an050nr bios
duvelhedz it works your dump thanksComment
-
Re: hp 15-an050nr bios
file good thanks!Comment
-
Re: hp 15-an050nr bios
it works fine thanksComment
-
-
Re: hp 15-an050nr bios
Help to identify correct bios
Hp star war edition DAX1BDMB6F0 REV:F
080A0 fan spin but cpu cold
080A9 fan reapeatly stop and go but cpu cold
0809B fan not spin cpu cold
08092 fan spin but cpu coldAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
-
Re: hp 15-an050nr bios
intel i7-6500u SR2EZ
I would like to be sure of the bios before starting a search for a hardware problemLast edited by jasko_jacker; 08-06-2019, 11:18 AM.Comment
-
Re: hp 15-an050nr bios
Yes, 080A0 is the right one.Ive added a screenshot of the platform.ini file from the bios update.
The schematic is posted on another thread: https://www.badcaps.net/forum/showthread.php?t=73893Last edited by SMDFlea; 08-06-2019, 11:47 AM.Comment
-
Re: hp 15-an050nr bios
ThanksComment
-
Comment
-
Re: hp 15-an050nr bios
Thank you brothersComment
-
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder... -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If... -
Hi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble... -
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...
Comment