Hello good day. Long story short. i unlocked the bios using SREP and switched the setting "Special display features Enable/Disable HybridGraphics" from "HybridGraphics" to "disabled"
this has bricked the laptop. it does not boot on internal or external display...
i have tried flashing known good roms from both lenovo and other forums and reflashed it to the chip.
but still no boot. the device turns on and cpu heat's up. but no post/boot.
I have attached the dumped corrupt bios.
The original serial is PF2KJR1J and bios version was FCCN21WW.
Board has the following info printed on it "GY535/GY536" with board ID of NM-D191 / NM-D19 Rev 1.0
this has bricked the laptop. it does not boot on internal or external display...
i have tried flashing known good roms from both lenovo and other forums and reflashed it to the chip.
but still no boot. the device turns on and cpu heat's up. but no post/boot.
I have attached the dumped corrupt bios.
The original serial is PF2KJR1J and bios version was FCCN21WW.
Board has the following info printed on it "GY535/GY536" with board ID of NM-D191 / NM-D19 Rev 1.0
Comment