i bricked my bios using the smokeless umaf tool and trying to tighten ram timings. i purchased a ch341a programmer and made the mistake of not backing up my bios before flashing the stock bios on the chip. i tried injecting my serial and all in the bios and then flashing but now the hdd light just blinks when powering on and nothing else. ill attach the firmware i flashed to the chip and the default i added it to. also the chip is a winbond W74M25JWEIQ. my serial is N2NRKD019645059
-
-
ROG Zephyrus G14 (2022)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
I flashed the chip with this rom with asprogrammer and it still just blinks every 5 seconds on the hdd light when I plug the cord up to the board. Idk if it makes a difference but even though my model on the box says g14 GA402RJ-g14.r96700 my board says GA402RKAttached FilesComment
-
-
Tomorrow I'll post your original bios (ASUS_GA402RJ_319_BIOS_Update_2)👍Comment
-
Your biggest mistake was losing your backup!Comment
-
Try this file.Comment
-
I finally got around to flashing this but it still just causes the had light to blink when plugging in and trying to power on. I also noticed that pin 1 on the chip has continuity to the ground pin. Could that be causing it to not power on and blink like that?Comment
-
Remove winbond, test in reverse conduction?
Values must be universal.
It's quite possible that the (ci Winbond) burned down...
Take care when handling the (CH431A), especially since it is a (ci Winbond 1.8v)
Attached FilesComment
-
-
hello
pleace help, laptop did not post, possible after bios update
mb ga402rk ddr5x16 r2.2
ga402rj-g14.r96700 on sticker
i try flash bios from this topic but no luckComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
GA402RJ -G14. R96700
SN: N2NRKD029521089
CN: G0J8Comment
-
Hello. I have a problem with my Asus Zephyrus G14 GA402RJ. Can someone upload full decrypted BIOS dump for it with ME region please?Comment
-
Thread merged. Please read the rules before posting, you must post the laptop serial number - SNID or Service tag (it must be TYPED - Don`t post pictures), post in an existing topic if there is one, post your backup etc,etc -> https://www.badcaps.net/forum/troubl...before-posting
Comment
-
Hello. I have a problem with my Asus Zephyrus G14 GA402RJ - very delayed start, no keyboard backlight.. Can someone upload full decrypted BIOS dump for it with ME region please?
S/n: N8NRKD00428234F
Model: GA402RJ6800-0 EADXHB8X20
CN:JHNYComment
-
Unfortunately there is no possibility to get corrupted BIOS backup since my laptop is with IT technician and the BIOS is corrupted anyway. That's why I asked for full backup of known good BIOS from the same model which someone might have.Comment
-
ASUS ROG Ally X - (Handheld Gaming PC)
Model No: RC72LA
Serial No: SBNVKD001014459
Hi all, I've spent the past week digging through the forums and guides to try correct my foolish mistake of changing hidden settings while tinkering around, and to be honest my heads overloaded so I'm hoping you'll be able to help.
I used a tool called 'Smokeless-UMAF' to access usually hidden settings in the bios. I tweaked one or two 'safe' things but made the mistake of tweaking a lot of settings under 'USB/Thunderbolt Configurations' when I didn't know what they did. For... -
With ASUS, not everything is quite so simple. I will show you my way. It may be longer or harder but it is the right way to do it in my humble opinion.
For example, you can have 3 similar ASUS motherboards, all being the same model, all of which will have different BIOS versions.
I will give you an example and my version of preparing BIOS from ASUS website and in the process I am always cleaning Intel ME while doing it so you have fully cleaned BIOS, no DMI data, no password, nothing.
This is the picture of 3 similar ASUS motherboards, all of them being X555LD... -
Hi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble... -
Hi there,
I know there is somebody who can tell me what is happening with my laptop. For start, it is an asus vivobook s510ua with an asustek x510ua motherboard with an intel i5 7200u cpu and 16gb ram.. i have a screenshot from speccy before strange things started.. as you can see the laptop type and bios version x510ua.302.I don’t manually update the bios because i don’t like to having a bricked bios, i know what troubles that gives..
I did a fresh win 11 install, and after the automatic updates, windows rebooted and automatically started asus ez flash..... -
Hi,
I have a serious problem to program the Z590 chipset SRAM with a Management Engine after replacing the chipset.
The new chipset is factory new and is not containing any Management Engine. Any attempts to program it into the chipset under Windows ends with a failure (eg. Error 20: Management Engine Device not present, or something similar).
Due to the lack of the ME several ports on the board, including all M.2 ports aren't working, booting OS works only on USB. So it's now other way, as to program the chipset with a ME.
Usually on ASUS boards it worked...
Comment