Hp Probook 440 G10 Bios Needed

[han19977]

post the original contents of the bios chip..

i uploaded Main and EC bios backup of my laptop

[han19977]

Hello,
please help me unlock this bios
Hp 440 G10 DA0X8TMB8E1
S/N : 5CD3459KQC

down below MAIN and EC bios of my laptop

[rex98]

I noticed there's a lot of unlock request for this model Hp Probook 440 G10
The patch won't work if the bios version is latest. use this bin flash both it won't work if you only flash the main you should Flash Both!
first boot press f10 apply factory defaults and restart, 2nd boot reset security settings to defaults and exit.
use BCU and put your original DMI.
frequently asked questions:
can i use this to my Hp Probook 440 G10 - Yes

[mesta83]

Hello I have a g10 440 probook SN: 5CD40716YZ
please help me unlock this, I attached both main and EC thank you

[mesta83]

Hello I have a g10 440 probook SN: 5CD40716YZ
please help me unlock this, I attached both main and EC thank you

I would really appreciate if anyone can help please.

[danito]

I would really appreciate if anyone can help please.

try post 43

[mesta83]

Will do, but as far as I understand this is a clean bios. How can I transfer serial and other important information from my files? Are they under specific address range?

[SMDFlea]

Will do, but as far as I understand this is a clean bios. How can I transfer serial and other important information from my files? Are they under specific address range?

Use HP Bios Config Utility. BCU

[mesta83]

Programmed both the files, had orange light on f5 and f8 blink a few times, then white light stays on the charging port and blank screen. Nothing else happens

[mesta83]

Re flashed and it works now. However, I need help with transfering DMI. I got BCU, read settings. I did replace serial and UUID, put manufacturing mode to lock, restart and laptop keeps asking to input things like feature byte build id etc. How can I use my old backup files to restore all this info please