Hi, can someone help me clear the Me region? It takes about 30 seconds to start.
model FZ-55F2601KM
sn 2iTSA93678
model FZ-55F2601KM
sn 2iTSA93678
-
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Thanks for your help. Works great.Comment
-
Good afternoon, can you help me remove the BIOS password
Panasonic FZ-55 MK1
SN-0ETSA33952
If you can, please clear the ME Region too
ThanksComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Everything works, thank you very much
retry or bad read/write
you use clip and ch341 ??
peste
There's another one hidden here I think
edit File replaced
I saw someone doing them via USB, it's probably much simpler.
He should reread a dump to see if it deletes everything!
Comment
-
I have a FZ-55D Mk2 and I want to remove the BIOS password (In my case I bought it new, set it, then forgot it 😑). I'm interested in learning how to do this myself and am wondering, is the CH341A the recommended programmer for this task? I see it mentioned here a bunch, but I looked at the stickied thread and it says it's not recommended.
Comment
-
I've had really good luck with the CH341A Black. You'll need a WSON8 6x8 "pogo" probe if you don't desolder the chip. Use NeoProgrammer with the CH341 on the FZ-55D. Be aware you'll need completely remove the motherboard to read the chip on the back of the mother board. Panasonic did not make this easy (on purpose) but it's not too difficult.Comment
-
The only thing ch341 has going for it is that it's so cheap it's nearly free. Get an XGECU T76 (or older if the price is too high for your taste), you'll be glad you did. The XGECU are fast, very well supported and while they're much more expensive than ch341 they're far cheaper than brand name programmers from chip manufacturers. You'll end up spending an arm and a leg for the various attachments and addons, but you don't HAVE to.
Back to the topic at hand...
How are you guys finding the password in the bios bin? I would also love to do this myself. I have two of the panasonic laptops. One from a foolish user who set a password himself and forgot it therefore when it was time to update the bios we had to do an exchange. The other has a known password but I'm really hoping to avoid messing with that one if I can get the information from this forum as that laptop belongs to my boss.Comment
-
Can anyone clear the ME region? Thanks in advance.
Panasonic FZ-55 MK1
SN-0ETSA33952Comment
-
Type the laptop serial number, full name and model, motherboard model, etc.
read the forum rules..https://www.badcaps.net/forum/troubl...before-posting
Comment
-
Good day,
I have tried to remove BIOS supervisor password from Panasonic Toughbook CF-33 mk1. Model number CF-33AENABTG, unfortunately I don't have any other info.
I read the BIOS using afuwin, edited it and tried to flash new edited BIOS using afuwin. Unsuccessfully. Afuwin showed "Error: Problem erasing flash." starting with 0x00040000 and stoped. Then I tried many other options to flash BIOS from Windows without any luck. Finally i rebooted the device - and no post. Afterwards I have read the corrupted bios chip (MX25L12873F) using EZP2010 programmer.... -
Hello, dear community. NEED A DIAGRAM of the HDD/SSD connector contacts as an example (a screenshot from the diagram of another laptop on which I have already done this and a photo of the patient's board) Maybe someone can make a screenshot of the diagram with the pinout? Or does someone have a diagram of the motherboard schematic?
I am asking, because not find the information myself anywhere. I have a PANASONIC CF19 MK2 laptop (Any revision will do, I do not think that the contacts in the connector are located differently) but finding a basket for it at reasonable prices is a problem.... -
Hello, i have a Panasonic Toughbook Cf-H2 Mk1 that won't power on. The battery charge without problem but no response from the laptop when i press the power button.
I have disassemble and unpluged the cmos battery, same no power on on battery with and whitout the adapter, and only adapter
I have check the voltage i have the main power rail ( +-16v normal for toughbook it's not 19v). I have on the coil after power management chip 3.3v and 5v.
I have check the 3.3v on the power button ribbon cable attach to the motherboard and the voltage go to 0v when i press the button. So... -
Does anyone have the schematic for toughbook cf-d1 mk1 motherboard model is DL3UP1969CAA thanks in advance12-07-2024, 02:22 PM -
I've been working on this awful project with a Panasonic FZ-55, basically I'm trying to intercept the eDP signal from the main board, and replace it with my own eDP signal connected from an lcd driver. The problem is, for some reason the 30 pin ribbon pinout is really unusual and not playing nice with my LCD controller. Long story short, I managed to fuck up my board and pull off some pads on the eDP out port, I'm hoping to find either another eDP out source somewhere else on the laptop, or figure out this goddamn pin layout so I can just replace the whole native display complex with my controller...
Comment