does anyone know how to program the ene kb9542? i understand that the dump is 160 kb. my rt806f detects the IC as a kb9010
-
-
Re: how to program the kb9542 super IO
RT8206F doesnt support KB9542. -
Re: how to program the kb9542 super IO
can you tell me which programmers support the kb9542?Comment
-
Re: how to program the kb9542 super IO
Honestly, never programmed this kbc so far but SVOD is likely to support.Comment
-
Re: how to program the kb9542 super IO
Vertyanov supports KB9542, but if you can change size of read to 160 in RT806F then it should not be different from the other KB9xxx-s.Comment
-
Re: how to program the kb9542 super IO
i appreciate the information. Have you programmed the kb9542?Comment
-
Re: how to program the kb9542 super IO
Yes, Legion Y740 mainboard LA-G132P, read write ok, through 10 pin debug port on board. I don't know how RT806F works but in Vertyanov you can add new chips and boards yourself to text file if you work out the pinout to keyboard connector and the chip is supported.Comment
-
Title:
Capacitor detached from PCB – RTX 2070 Super Founders Edition
Description:
During maintenance on an RTX 2070 SUPER Founders Edition, I found a capacitor lying on my desk after reassembly.
I did not notice it detaching, so I am unsure of its original location on the PCB.
Procedure performed:
- Removed backplate
- Cleaned heatsink and PCB with isopropyl alcohol + soft ESD brush
- Reapplied thermal compound
- Reassembled card
Observed behavior after reassembly:
- GPU powers on and operates normally under... -
[HELP] Acer AN515-55 (LA-J871P Rev: 1B) – Board won't power on after GPU investigation – Suspecting Super I/O or PCH
Hi everyone,
I'm working on an Acer Nitro 5 unit with the following specs:- Motherboard: LA-J871P Rev: 1B
- Model: Acer AN515-55-59MT
- S/N: NHQ7JAL00403906A973400
- SNID: 03902728734
Initial Issue
The laptop initially presented graphic issues and driver failure (Code 43) for the GPU.
After preventive maintenance (cleaning, thermal paste, etc.), it powered on normally. We disassembled it again to inspect the GPU, reassembled... -
Hi All,
I recently got a bunch of faulty/partially faulty PS3s and wanted to get some advise on them. Models are:
X4 are PS3 slims with disc drive errors.
X1 is a PS3 slim with the 8002F1F9 update error.
X1 is a ps3 slim with no display.
X1 is a slim with RLOD
X1 is a super slim with a missing disc drive and receiving the same update error 8002F1F9 (I'm assuming because it needs it's drive)?
X1 is another super slim with no power (board number MPX-001).
Does anyone know of any good resources that list parts interchangeability?... -
I just received my new io programmer and it works great. I'm trying to figure out how to program the kb9542 with it. the kb9542 ENE files are 160kb compared to the usual ENE files that are 128kb. how to program the thing to read 160kb instead of 128kb? -
Hello everyone,
anyone here who has experience with replacing the super IO chip of an ROG ally?
I have one on my bench which has a burnt super io (ITE 5125VG-192). On some devices the super-io downloads it's firmware from BIOS if it's empty. As i don't have a programmer for this chips i hope someone here has already changed the chip and can give me a hint if it's working with an empty chip if it needs external programming.
Thanks
Ongo
Comment