does anyone know how to program the ene kb9542? i understand that the dump is 160 kb. my rt806f detects the IC as a kb9010
-
-
Re: how to program the kb9542 super IO
RT8206F doesnt support KB9542. -
Re: how to program the kb9542 super IO
can you tell me which programmers support the kb9542?Comment
-
Re: how to program the kb9542 super IO
Honestly, never programmed this kbc so far but SVOD is likely to support.Comment
-
Re: how to program the kb9542 super IO
Vertyanov supports KB9542, but if you can change size of read to 160 in RT806F then it should not be different from the other KB9xxx-s.Comment
-
Re: how to program the kb9542 super IO
i appreciate the information. Have you programmed the kb9542?Comment
-
Re: how to program the kb9542 super IO
Yes, Legion Y740 mainboard LA-G132P, read write ok, through 10 pin debug port on board. I don't know how RT806F works but in Vertyanov you can add new chips and boards yourself to text file if you work out the pinout to keyboard connector and the chip is supported.Comment
-
[HELP] Acer AN515-55 (LA-J871P Rev: 1B) – Board won't power on after GPU investigation – Suspecting Super I/O or PCH
Hi everyone,
I'm working on an Acer Nitro 5 unit with the following specs:- Motherboard: LA-J871P Rev: 1B
- Model: Acer AN515-55-59MT
- S/N: NHQ7JAL00403906A973400
- SNID: 03902728734
Initial Issue
The laptop initially presented graphic issues and driver failure (Code 43) for the GPU.
After preventive maintenance (cleaning, thermal paste, etc.), it powered on normally. We disassembled it again to inspect the GPU, reassembled... -
I just received my new io programmer and it works great. I'm trying to figure out how to program the kb9542 with it. the kb9542 ENE files are 160kb compared to the usual ENE files that are 128kb. how to program the thing to read 160kb instead of 128kb? -
Hello everyone,
anyone here who has experience with replacing the super IO chip of an ROG ally?
I have one on my bench which has a burnt super io (ITE 5125VG-192). On some devices the super-io downloads it's firmware from BIOS if it's empty. As i don't have a programmer for this chips i hope someone here has already changed the chip and can give me a hint if it's working with an empty chip if it needs external programming.
Thanks
Ongo -
Hi ya folks,
Hope everyone's having a nice day.
I recently replaced the super I/O chip and now I believe i need a clean ME for the system to come online. Cause i started the laptop and it did not start.
Laptop details
Sony VAIO
Product name VJS111
Model Number VJS111D12N
Serial Number 7014633
Motherboard markings
FEILONG MB REV 1.03B
UMT-KS 2V 94V-0 E49068 A7 1545 07-01
Original bios file attached
SUPER I/O chip model ITE IT8528VG
Thanks a million in advance folks... -
Hi, I would like some advice.
I have two motherboards, one with a dedicated GPU and the super I/O with obvious burn marks on it, and another working motherboard without a dedicated GPU.
My question is: can I swap the super I/O from the motharboard without dedicated GPU to the one with dedicated GPU? Will it work anyway or is that super I/O taken from the motherboard without GPU only good on motherboards without dedicated GPU?
The motherboards are exactly identical even in terms of versions...the only difference concerns the dedicated GPU in one and not in the other.
Comment