how to program the kb9542 super IO

[kjchatman]

does anyone know how to program the ene kb9542? i understand that the dump is 160 kb. my rt806f detects the IC as a kb9010

[mcplslg123]

Re: how to program the kb9542 super IO

RT8206F doesnt support KB9542.

[kjchatman]

Re: how to program the kb9542 super IO

can you tell me which programmers support the kb9542?

[mcplslg123]

Re: how to program the kb9542 super IO

Honestly, never programmed this kbc so far but SVOD is likely to support.

[khaahk]

Re: how to program the kb9542 super IO

Vertyanov supports KB9542, but if you can change size of read to 160 in RT806F then it should not be different from the other KB9xxx-s.

[kjchatman]

Re: how to program the kb9542 super IO

i appreciate the information. Have you programmed the kb9542?

[khaahk]

Re: how to program the kb9542 super IO

Yes, Legion Y740 mainboard LA-G132P, read write ok, through 10 pin debug port on board. I don't know how RT806F works but in Vertyanov you can add new chips and boards yourself to text file if you work out the pinout to keyboard connector and the chip is supported.