hp spectre 13t-v100 battery connector

[qtechphaz]

need the connector type for the mb battery connector.

hello, I have the hp spectre 13t-v100 and I'm assuming the battery connector on the board is the same for variations of the product line. I have to replace the connector but lost the one I desoldered.

please help

[mon2]

Re: hp spectre 13t-v100 battery connector

Post clear pics of the battery connector and where the mating connector was on the logic board.

How many pins?

Update:

1) 30 pins ?

2) Watch this video:

https://youtu.be/H22Q2vIffN0

Is your connector the same ?

It should be possible to purchase the same macbook connector for your repair - appears to be the keyboard connector common to Apple logic boards.

3) If you have or can source from your local store, grab a micrometer and measure the pin-to-pin pitch of the connector pads on your logic board. This will allow us to confirm which connector models can be used.

[qtechphaz]

Re: hp spectre 13t-v100 battery connector

Thanks

yes the connector is 30 pins, however i don't have a tool to measure the exact pitch. I do know that a connector with pitch of 0.5mm is to gives a width that is to wide for the flex cable. Also when desoldering I blew off 3 resistors and only a schematic will help - I guess there is none available as I have searched endlessly.