e4065a dead

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lordgeny
    Badcaps Veteran
    • Apr 2016
    • 223
    • Italia

    #1

    e4065a dead

    e406s notebook totally dead, lights out.
    Customer set wrong voltage i think, nut nothing burned

    only the plastic a little burned , circle red in the pictures
    Attached Files
    Last edited by lordgeny; 03-25-2021, 10:12 AM.
  • Spider1211
    Badcaps Veteran
    • Oct 2019
    • 532
    • Mauritius

    #2
    Re: e4065a dead

    Looks like a burnt mosfet. Remove it and check for continuity on the board (with black probe on ground). If there is no short, just replace the mosfet and try to power the board. Please provide a better picture with the plastic cover removed.

    Comment

    • lordgeny
      Badcaps Veteran
      • Apr 2016
      • 223
      • Italia

      #3
      Re: e4065a dead

      i will make a pics with camera scope later

      Comment

      • lordgeny
        Badcaps Veteran
        • Apr 2016
        • 223
        • Italia

        #4
        Re: e4065a dead

        thats it
        Attached Files

        Comment

        • lordgeny
          Badcaps Veteran
          • Apr 2016
          • 223
          • Italia

          #5
          Re: e4065a dead

          its the mosfet in details
          Attached Files

          Comment

          • Spider1211
            Badcaps Veteran
            • Oct 2019
            • 532
            • Mauritius

            #6
            Re: e4065a dead

            It looks damaged, there appear to be a hole. Did you check if the mosfet is shorted?

            Comment

            • lordgeny
              Badcaps Veteran
              • Apr 2016
              • 223
              • Italia

              #7
              Re: e4065a dead

              just waiting new 861dw coming on saturdsay

              Comment

              • lordgeny
                Badcaps Veteran
                • Apr 2016
                • 223
                • Italia

                #8
                Re: e4065a dead

                i used the old baku to change with a AON7408 i get orange lighe , now i have to power on it.. it supposed its equivalent

                Comment

                • Spider1211
                  Badcaps Veteran
                  • Oct 2019
                  • 532
                  • Mauritius

                  #9
                  Re: e4065a dead

                  Is the laptop turning on now? Check the datasheet of the old mosfet and compare with the replacement to check if they are compatible.

                  Comment

                  • lordgeny
                    Badcaps Veteran
                    • Apr 2016
                    • 223
                    • Italia

                    #10
                    Re: e4065a dead

                    yes its working FIXED.
                    thanks to all

                    Comment

                    Related Topics

                    Collapse

                    • Andreasbest
                      Lenovo P50 dead with burned motherboard
                      by Andreasbest
                      Hello.
                      I received a P50 in very good shape that is dead and smelled burned board when on power supply.
                      I strip it and found a heavily burned area, there should be some cap but now are smoke.
                      Not sure where the one copper trace stops and starts the next, they seem mixed probably due to heat, this is my main problem as i'm not sure where should i solder what, so any help is appreciated.
                      Schematics & boardview here

                      Pictures os the affected area attached below.
                      Not sure if it can be saved but i'll give it a try.
                      Thank you in advance!...
                      03-26-2024, 06:22 AM
                    • quic307
                      Hp 17-ab burned IC vRAM and dead vga chipset
                      by quic307
                      Hello team,

                      I have one HP 17-AB with motherboard DAG37DMBAD0 REV D. The motherboard has problem with burned IC vRAM and dead vga chipset.
                      When I opened it, I get 5-4 blinging error and after 3 times opens and works.
                      I want to use the notebook with cpu only and to deactive the vga.

                      Does anyone knows how to by pass the error?

                      I attached schem and photos.

                      MOD Edit - Link to Schematic https://www.badcaps.net/forum/showthread.php?t=83938
                      Reminder: rules and organization of this section https://www.badcaps.net/forum/sh...
                      09-26-2023, 02:21 AM
                    • madfreak
                      Dead Dell G7 17 7700 - burned mosfets and please help me: What is that part ?
                      by madfreak
                      Hi, after overheating my laptop came into the dead zone...

                      DELL G7 17 7000
                      GTX 1660Ti
                      i7-10750H

                      The led indicator near battery is on ( while the charger is plugged in )


                      After shutting down suddenly, laptop is not powering on and i saw a fume that came from the heatsink...after I disassemble that heatsink i saw a burned mosfet near GPU and a " coil" near mosfer that is in CPU area.

                      Can You please tell me what is that part " coil ? / R152017H" or what is the name of that part...because there is no schematics...
                      03-07-2022, 04:19 PM
                    • Kemer
                      Led status indicator light transfer plastic
                      by Kemer
                      Hello, the LED status indicators on my Lenovo Z580 are not working. Actually the motherboard LEDs are working but the light doesn''t coming to the front view. The plastic part is which you can see in photo must transfer the light to the frontview but just half of the plastic is illuminating.

                      There are three status indicators on the front (power, battery, caps lock), and none of them are illuminated.

                      The plastic piece doesn't appear to be broken.

                      1. What are your suggestions for resolving this issue?

                      2. Is the plastic piece made of special ma...
                      08-19-2025, 07:02 PM
                    • mikey5791
                      Need help to replace burned resistor in 350w atx psu
                      by mikey5791
                      Hi to all forum members,

                      Got this faulty 350 watt atx psu dirt cheap from a local online seller as i am keen to use it as a learning tool to repair faulty power supply.
                      The faulty part is quite obvious from the burn area near the 16pin KA7500 BD pwm. The fuse is still intact with good continuity.

                      Upon power on ac, there is 5vdc standby power on cathode of diode D14 and about 10vdc on cathode of diode D13.(This should be the aux power to generate the 12v and 5v rail.)
                      Initially i replace the two burned resistors near my marked red arrow to 200 ohm resistor...
                      12-26-2024, 04:55 AM
                    • Loading...
                    • No more items.
                    Working...