toshiba satellite p750 wifi card not working after removing coil to kill dead gpu

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • durstig66
    New Member
    • Jan 2020
    • 2
    • Deutschland
    #1

    toshiba satellite p750 wifi card not working after removing coil to kill dead gpu

    after removing a power choke coil (pl602 in the schematic) to kill the dead gpu that was outputting heat my wifi card stopped working the other mini pcie slot isnt working either even when tying a different network card

    so my question is how do i keep the gpu dead while restoring my mini pcie slots functionality
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • double_DD
      How can I be sure that my EC chip is dead?
      by double_DD
      Hi all,

      As the title suggests, how can I be sure that my EC chip is really dead?

      I've recently gotten into this hobby of laptop repairs, and have successfully brought back to life a couple with some easy fixes, mostly shorted caps.

      Now I'm working on HP Probook 455 G8, that had some "devil" run around on 3V line, burning a bunch of stuff. Luckily I have a dead 455G7 (for spare parts) so I managed to fix it (swapped burned parts) to a point that it will charge (both on barrel jack and usb-c), but it doesn't want to turn on. There is a 3V3 on a keyboard...
      03-12-2025, 07:47 AM
    • techrepairheide
      Gaming laptop Clevo NH79EP with short on 5VS-rail
      by techrepairheide
      Hello,

      first of all I want to apologize for my bad English, but I try to give my best.

      Customer brought me a laptop, which is charging the battery (when the dc-jack is connected) but don't power up when the power-button was pressed down. Only the white LED lights up, and you can hear a short noise in same interval when power-button was pressed and hold for longer timer. The customer changed already battery and dc-power-adapter.

      For this laptop the correct shematic is the service manual "Clevo NH50ER NH57ER NH50EPS NH57EPS - 6-71-NH5S0-D02 Schematic"....
      10-13-2024, 02:49 PM
    • ygorsan
      LG 55NANO77SRA TV ā€“ Menu scrolling by itself even after removing button board (Main Board EBU66792103)
      by ygorsan
      Hi everyone,




      Iā€™m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







      šŸ§© Problem Summary:
      • The TV keeps scrolling through the menu or selecting items by itself.
      • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
      • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
      • I
      ...
      07-28-2025, 08:34 AM
    • adelfr2009
      HP Victus 15-fb dag3pamb8d0 Short on VCORE ā€“ How to Confirm CPU Fault?
      by adelfr2009
      I have a laptop HP Victus 15-fb with motherboard DAG3PRMB8D0, CPU Ryzen 7535HS, and GPU RTX 2050. The laptop has a power issue: it does not turn on at all, and there is no light on the DC jack.
      After inspection, I found that an NMOS near the charger input had a short. I replaced it, but the short remained on the 19V line. I checked the charging circuit and it was fine, but the short appears after the current sense resistor near the charger. The charger does not pass current when connected, so I inject 3Vā€“4V after the sense resistor. No component gets hot, except the CPU which becomes...
      09-28-2025, 10:21 PM
    • chth96
      How can I test coil whether it is really broken or not?
      by chth96
      I have old game console which have connected to 220v outlet by previous owner and It is not able to turn on.

      I checked continuity of fuse in PSU unit with a multimeter which is shown in the below picture with a orange circle around it, and It seems that fuse became open circuit.

      I also found that as well as bulging capacitor, there is unidentified coil which has residue all over its surface

      unidentified coil which has residue all over its surface


      I want to replace this round black fuse and unidentified coil if it got broken.
      ...
      02-20-2024, 01:07 AM
    • Loading...
    • No more items.
    Working...