Hi.
Got this laptop for free with a smashed screen, successfully adapted a 15.6" CCFL screen by reusing the 16" frame and slotting in the 15.6".
However, this issue arises, even with another (known working and tested working on this exact laptop, before going for the 15.6") LCD:
Laptop powers on and stays blank for 7 seconds then powers off, and repeats the cycle.
I'm at loss as to what I should try.
RAM: 2x2GB Samsung (known working pulls from a Dell Vostro 1015)
GPU: Geforce 8600M MXM-II 512MB, was working before, no artefacting or anything like that
CPU: AMD Turion Ultra ZM80 2.10GHz
I have even searched for a NEC-Tokin cap (someone suggested that) but there's none, just 2 regular SMD tantalums.
Got this laptop for free with a smashed screen, successfully adapted a 15.6" CCFL screen by reusing the 16" frame and slotting in the 15.6".
However, this issue arises, even with another (known working and tested working on this exact laptop, before going for the 15.6") LCD:
Laptop powers on and stays blank for 7 seconds then powers off, and repeats the cycle.
I'm at loss as to what I should try.
RAM: 2x2GB Samsung (known working pulls from a Dell Vostro 1015)
GPU: Geforce 8600M MXM-II 512MB, was working before, no artefacting or anything like that
CPU: AMD Turion Ultra ZM80 2.10GHz
I have even searched for a NEC-Tokin cap (someone suggested that) but there's none, just 2 regular SMD tantalums.
Comment