Chuwi Lapbook 14

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • DeniS182
    Badcaps Veteran
    • Jun 2014
    • 328
    • Slovakia

    #1

    Chuwi Lapbook 14

    Hi,
    I have this notebook with this problem - laptop start , but without picture, only Black screen also on hdmi output. I can't found any schematic for this chines laptop.
    But I don't have voltage on one coil. There Is a driver chip 208 - smd code. Know someone this IC? Thanks
    Attached Files
  • SMDFlea
    Super Moderator
    • Jan 2018
    • 20702
    • UK

    #2
    Re: Chuwi Lapbook 14

    Check the keyboard ribbon cable,and connector, it looks like it may have some damage.
    All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

    Comment

    • DeniS182
      Badcaps Veteran
      • Jun 2014
      • 328
      • Slovakia

      #3
      Re: Chuwi Lapbook 14

      Ribbon cable is ok , power Button is on keyboard and works fine. But connector is broken little bit I fix it with hot glue.. also lock on connector for lvds cable is missing , but problem is not here.

      Comment

      • DeniS182
        Badcaps Veteran
        • Jun 2014
        • 328
        • Slovakia

        #4
        Re: Chuwi Lapbook 14

        up

        Comment

        Related Topics

        Collapse

        • chth96
          How can I test coil whether it is really broken or not?
          by chth96
          I have old game console which have connected to 220v outlet by previous owner and It is not able to turn on.

          I checked continuity of fuse in PSU unit with a multimeter which is shown in the below picture with a orange circle around it, and It seems that fuse became open circuit.

          I also found that as well as bulging capacitor, there is unidentified coil which has residue all over its surface

          unidentified coil which has residue all over its surface


          I want to replace this round black fuse and unidentified coil if it got broken.
          ...
          02-20-2024, 01:07 AM
        • waterchill
          What part is this coil from a MacBook A2681 ?
          by waterchill
          Hi everyone

          I'm struggling to point out what part is this? It is a coil, but the parameters say: 10OHM - 50% - 1A - 0.05Ohm

          So it is a coil with 0201 dimensions, 1A max current, 0.05ohm resistance but what is 10ohm? For a coil we need specs like 1uH or so.

          IAny ideas? It is from a MacBook A2681

          Thank you...
          08-08-2024, 01:46 AM
        • Gjackson
          ADP-160FR ps4 slim PSU, shuts down under load and has severe coil whine.
          by Gjackson
          Hi all, the PSU originally had a no 12v issue where as soon as I bridged the 5v standby to the ACDC_stby the psu would switch itself off completely. I monitored the voltage on the main filter caps while doing this and saw that the PFC was bringing the voltage up to around 360vdc before shutting down. Given that I saw that as a little low I replaced the PFC feedback resistors from a donor PSU and that got it to power on, without a load no coil whine is present and there is a stable 12v however as soon as I put it in the PS4 it starts whining really badly, however 12v remains stable but after a...
          01-13-2024, 10:34 AM
        • chth96
          How Can I identify IFT coil?
          by chth96
          I have a CD unit which is came from saturn game console.
          It always perceived Any retail CD or CD-R as Audio-CD.
          Of course I changed laser head and adjust pot of laser head nearby, but It always failed to perceive as saturn game CD.
          I think that this problem probably begins When I tighten IFT coil too hard with small screw driver and suddenly I heard some kind of snap or cracking sound


          I desoldered this IFT coil and It is 7pin IFT coil and written "4120 009 62VK" on the surface.


          Is there any way to identify its frequency in order...
          11-11-2022, 05:31 AM
        • lerom
          PowerEdge R740 coil resistance
          by lerom
          Hello,

          can anyone measure the resistance on coil L12 3.3V (near USB, EMMC chip) and coil L46 1V near CPU1 ?
          thanks....
          03-23-2025, 02:21 AM
        • Loading...
        • No more items.
        Working...