hi, got this laptop one month ago with a freezing problem. it has only one bga for nb sb and cpu. its cpu is n2840.
i ordered stencil for reballing the chip from goldenchipset, but when i melted the 0.35mm bals, when lifting the stencil some pad ripped off and other balls didnt melt on bga. i looked and investigate the situation and found that balls holes on stencil were not the right dimention. i asked gc and they would send me a new stencil, but as far some pads were ripped off i got a refurbished bga too with already leaded balls on it.
when bga arrived, i soldered properly, but got a white screen.
i gived then another reflow and now this time i have black screen.
what could be the cause ?
i removed bios, its a winbond 25q64fv, but when i put on my programmer it tell me chip is different.... and im not able to program it.
now i will put some other bios with a dump i got from internet and ggive it a try, but would like to know if someone got already in the same situation and why white screen and then after a reflow black screen ?

edit: tried 2 bios dump ive found on internet, but with that bioses pc wont even start.
i ordered stencil for reballing the chip from goldenchipset, but when i melted the 0.35mm bals, when lifting the stencil some pad ripped off and other balls didnt melt on bga. i looked and investigate the situation and found that balls holes on stencil were not the right dimention. i asked gc and they would send me a new stencil, but as far some pads were ripped off i got a refurbished bga too with already leaded balls on it.
when bga arrived, i soldered properly, but got a white screen.
i gived then another reflow and now this time i have black screen.
what could be the cause ?
i removed bios, its a winbond 25q64fv, but when i put on my programmer it tell me chip is different.... and im not able to program it.
now i will put some other bios with a dump i got from internet and ggive it a try, but would like to know if someone got already in the same situation and why white screen and then after a reflow black screen ?

edit: tried 2 bios dump ive found on internet, but with that bioses pc wont even start.
Comment