Axioo Neon HNM (ECS_MB40IAX_MB40II4) Dead

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • abuhamza
    Member
    • Dec 2017
    • 19
    • Indonesia
    #1

    Axioo Neon HNM (ECS_MB40IAX_MB40II4) Dead

    I have this mainboard that would not turn on. The DC Power Supply shows 0.003 Amps. I Checked there is no voltage in battery slot pin, and there is no voltage in 5VA and 3VA.

    I am new in board repair, so where do i start?

    Thanks in advance
    Attached Files
    Tags: None
    • abuhamza
      Member
      • Dec 2017
      • 19
      • Indonesia
      #2
      Re: Axioo Neon HNM (ECS_MB40IAX_MB40II4) Dead

      In Addition, OZ8618 (PU1) in pin 11 (PA) has 25v, and pin 12 (PB) has no voltage.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Document Archive
          Axioo NEON MNW / Clevo W760S / Clevo W765S Laptop Schematic
          by Document Archive
          Axioo NEON MNW / Clevo W760S / Clevo W765S Laptop Schematic...
          10-04-2024, 03:59 AM
        • double_DD
          How can I be sure that my EC chip is dead?
          by double_DD
          Hi all,

          As the title suggests, how can I be sure that my EC chip is really dead?

          I've recently gotten into this hobby of laptop repairs, and have successfully brought back to life a couple with some easy fixes, mostly shorted caps.

          Now I'm working on HP Probook 455 G8, that had some "devil" run around on 3V line, burning a bunch of stuff. Luckily I have a dead 455G7 (for spare parts) so I managed to fix it (swapped burned parts) to a point that it will charge (both on barrel jack and usb-c), but it doesn't want to turn on. There is a 3V3 on a keyboard...
          03-12-2025, 07:47 AM
        • Stephen
          A2991 Logic Board issue, 20volts 0 amps help!
          by Stephen
          Customer plugged in samsung monitor into the board and used it as a power supply, killed UG800 and UG400. I replaced those two with an exact donor board we had In stock and working, board pulls 5volts and then gets like 2.89 amps on the left side. The singular port is the port that failed. Used a perfectly working chips from donor (board was locked) Now I only get 5volts 0 amps on that power and then 20volts 0 amps on the two left side ports, I checked for DFU and nope nothing, computer not turning on. No shorts present anymore. I am confused as I used the exact components from an identical...
          09-10-2025, 03:16 PM
        • Stephen
          A2991 logic board issue, 20volts 0 amps help!
          by Stephen
          Customer plugged in samsung monitor into the board and used it as a power supply, killed UG800 and UG400. I replaced those two with an exact donor board we had In stock and working, board pulls 5volts and then gets like 2.89 amps on the left side. The singular port is the port that failed. Used a perfectly working chips from donor (board was locked) Now I only get 5volts 0 amps on that power and then 20volts 0 amps on the two left side ports, I checked for DFU and nope nothing, computer not turning on. No shorts present anymore. I am confused as I used the exact components from an identical...
          09-10-2025, 03:15 PM
        • disorder
          ps5 edm-033 dead after hdmi/usb ports destroyed
          by disorder
          hello guys,

          i need help to repair a edm-033 ps2
          history : as always hdmi port and usb ports destroyed after unplugged
          after change them, ps5 dead too : 1 beep, no blue light. after inspection 1.8v power was shorted, and because of dead panasonic chip. after remove it : no short anymore
          so i changed it
          now i have got 5v stby,, 3.3v stby, 3.3v power, 1.8v power and no short on them
          but the ps5 is dead again : 1 beep, near 10 seconds with power lines and then off, no blue light ...

          i don't see any projection of liquid metal on pcb.
          ...
          01-14-2025, 12:48 PM
        • Loading...
        • No more items.
        Working...