Anything about this programmer?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lezsimply
    The Wanderer
    • Jan 2013
    • 645
    • Philippines

    #1

    Anything about this programmer?

    Hi guys! I'd like to know your opinions regarding bios programmer

    http://www.ebay.in/itm/320967107440?...t_13319wt_1038

    I already placed an order on ebay for EZP2010 and will arrive soon. My Dad insisted if I can go a little higher but no more than 100$. Thanks
  • dj_ricoh
    Badcaps Legend
    • Jan 2013
    • 2073
    • uk

    #2
    Re: Anything about this programmer?

    if you only have a pc/notebook target with 8 legs chips that ezp its more then perfect.
    i even did some sky boxes with that programmer :P
    Just cook it! It's already broken.

    Comment

    • lezsimply
      The Wanderer
      • Jan 2013
      • 645
      • Philippines

      #3
      Re: Anything about this programmer?

      yup just for pc's. The only drawback I could think of is the chip support. EZP2010 was made 2009 and sold early 2010. I was just hoping there would be an updated version of it which can support to the latest boards at least 2013. The other programmer I posted is more updated I suppose. Thanks

      Comment

      • lord
        Badcaps Veteran
        • May 2011
        • 319
        • Croatia

        #4
        Re: Anything about this programmer?

        I ahve EZP2010 and it is OK. Satisfied.

        Comment

        • lezsimply
          The Wanderer
          • Jan 2013
          • 645
          • Philippines

          #5
          Re: Anything about this programmer?

          Guys do you think this project is still applicable for today's motherboard bios chips? It was made 4 years ago.

          http://randomprojects.org/wiki/index...status_updates

          Comment

          • tomodachi
            Badcaps Veteran
            • Apr 2012
            • 595
            • Turkey

            #6
            Re: Anything about this programmer?

            MiniPro TL866 is a perfect programmer too. Just saying.

            Comment

            • spidey
              climbs
              • Dec 2012
              • 644
              • Cyprus

              #7
              Re: Anything about this programmer?

              http://www.aliexpress.com/item/Free-...73114.html?s=p


              i'm using this one, it is fast and functional.

              Comment

              • lezsimply
                The Wanderer
                • Jan 2013
                • 645
                • Philippines

                #8
                Re: Anything about this programmer?

                MiniPro TL866 is a perfect programmer too. Just saying.
                I already have miniPRO TL866 and ezp2010. And I like them both

                http://www.aliexpress.com/item/Free-...73114.html?s=p


                i'm using this one, it is fast and functional.
                Wow spidey! It has memory slots! amazing

                The reason why I ask is because I want to try something different, as portable as it can be. And its a challenge to make one. since its open for everyone I might as well try it. Thanks guys

                Comment

                • spidey
                  climbs
                  • Dec 2012
                  • 644
                  • Cyprus

                  #9
                  Re: Anything about this programmer?

                  it also has a vga connector to flash roms in monitors.

                  Comment

                  Related Topics

                  Collapse

                  • STKR123
                    The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
                    by STKR123
                    Greetings badcaps community,

                    I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
                    So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

                    Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

                    I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

                    These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

                    I learned that desoldering...
                    10-29-2024, 06:03 AM
                  • Teeheeze
                    RT809H Programmer Firmware Corrupted
                    by Teeheeze
                    This is a shot in the dark, but I was just using my RT809H programmer and it got stuck in a certain state so I power cycled it. Now, the device LED just flashes quickly and does not connect to the software. I've tried to update the BIOS of it and it fails. I went so far as to remove the ROM from the programmer itself but it's some weird chip (I believe ATMEL, but I can't find any datasheet on it) so I've been unable to read the BIN from it w/ my other programmer. Chip has ATMLHC4C56BM CN written on it (I think). I'll upload an image. I have the programmer's BIN ready to program it manually. Anyone...
                    02-13-2025, 04:51 PM
                  • H34TO
                    ITE IT8390 (IT8390E-256) programmer "ITE Download Board 4" user manual + firmware, flashing ITE ECs on the cheap
                    by H34TO
                    Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...
                    06-17-2025, 07:17 AM
                  • vinceroger69
                    TL866CS MiniPro EPROM programmer software
                    by vinceroger69
                    Hi has anyone got the latest software for the TL866CS MiniPro EPROM programmer version 03.2.86 is installed now i have tried the update site in the programmer software but it wont connect to their website i am running windows 10

                    Edit found this site programmer works now http://www.xgecu.com/EN/Index.html
                    09-03-2024, 06:21 AM
                  • EazyBone
                    EMMC programmer questions
                    by EazyBone
                    Looking to up my game a little bit, but these programmers seem a bit daunting.

                    Trying to get a device for EMMC repair, and it's very difficult to lookup all the words to find if I'm on the right track lol.

                    Trying to reprogram EMMC on Sony/Hisense mainly but would like to hit a few other brands.

                    My question is would either of these work? And is there a specific card reader I need for TV emmc? There is like 10-40 additional pieces that I can get but not sure what I actually need for my application only.

                    I may do eeprom as well. Can someone point...
                    04-21-2024, 08:18 AM
                  • Loading...
                  • No more items.
                  Working...