TL866CS MiniPro EPROM programmer software

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • vinceroger69
    Badcaps Legend
    • Mar 2012
    • 6714
    • uk
    #1

    TL866CS MiniPro EPROM programmer software

    Hi has anyone got the latest software for the TL866CS MiniPro EPROM programmer version 03.2.86 is installed now i have tried the update site in the programmer software but it wont connect to their website i am running windows 10

    Edit found this site programmer works now http://www.xgecu.com/EN/Index.html
    Last edited by vinceroger69; 09-03-2024, 06:57 AM.
    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 30977
      • Albion
      #2
      http://www.xgecu.com/MiniPro/minipro_setup685.rar

      this open-source project is far more up to date
      https://gitlab.com/DavidGriffith/minipro/

        Comment

        Previous template Next

        Related Topics

        Collapse
        • STKR123
          The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
          by STKR123
          Greetings badcaps community,

          I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
          So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

          Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

          I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

          These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

          I learned that desoldering...
          10-29-2024, 06:03 AM
        • dicky96
          TL866A - need to program 25Q21BT but device not on list
          by dicky96
          Hi guys
          This is the first time my TL866CS let me down (other than 1.8V eproms for which I ordered CH341 but it did not arrive yet)

          I want to program a 25Q21BT Eprom but it is not found on the list in minipro

          I can see GD25VQ21B but when I try to read my chip, the ID does not match
          0x C8 40 12

          My App is version 6.85 and programmer 03.2.86

          Is there a software update to program this eprom. The datasheet says it is 3.3V (if this is the right one)

          https://pdf1.alldatasheet.com/datash.../776356/ELM/GD...
          02-23-2022, 09:32 AM
        • z1Po
          Rare NANO Bios Programmer software/driver
          by z1Po
          Hi guys ,I'm looking for software related with this rare bios programmer.There is no any official site providing SW for that old board. Practically is (new) unused and unusable in that state without software . Hope anybody know any info/software about it. Thanks in advance

          ...
          09-19-2021, 06:36 AM
        • SMDFlea
          How to add chip support to NeoProgrammer software for the CH341A Programmer
          by SMDFlea
          Adding chip support is quite easy,there`s even some instructions included with NeoProgrammer,although its not obvious where they are
          and once you do find them there`s a few crucial steps missing.

          Extract chiplist.zip to a folder,the instructions are in Import_EN.txt and in Import.xml .Its the xml file where we add the new chip.



          Open Import.xml with notepad or any other text editor.In this example i`m adding a Macronix MX77L25650F SPI_NOR chip.



          After adding the chip save the xml file and copy it to the root directory of the...
          05-26-2024, 07:15 AM
        • dicky96
          25B127DSIG programming with TL866CS?
          by dicky96
          Hi guys
          My TL866CS doesn't have this eprom in the list of devices (Minipro v6.85) 25B127DSIG

          Possibly because I have an old version of the software? I tend to stick with something until it let's me down.

          Can I select some other device or is there a link where I can get an updated version of the software if needed, and not worry about malware etc

          I downloaded XGeko pro V8.51 but that does not list this eprom either

          I also have a CH341A but never actually used it.

          Thanks
          Rich
          08-02-2022, 09:06 AM
        • Loading...
        • No more items.
        Working...