[help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

[phantomEVO]

please help me

this is an asus f5sl. i've desoldered the eeprom to reprogram it but i've broken 4 solder pin! two of them can be repared but other two haven't trace! could you help me please? it's very important

[Learn2Day]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

I didn't understood if the is missing on the chip or the board. If it's in the chip, just buy a new one, it's not an expensive part. If in the board, that's worse. Can you post a good quality picture of the issue?

Cheers.

[phantomEVO]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

problem is on the motherboard

[Learn2Day]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

Post a picture, there could be a small chance circuits are on surface and you can scrape the polish to bridge contacts, other than that... You're f§@$&d!!

Good luck!

[phantomEVO]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

[phantomEVO]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

there arent' problem with the first on the left and the second on the right. problem is for the other two!

[domas]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

lower left one can easily be extended with thin wire, did you try soldering one thin wire directly to the track? Same on the other one, i am just unable to see where it goes to

[phantomEVO]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

the problem is only for the two pin without trace!!

[ben7]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

the problem is only for the two pin without trace!!

When you put the new chip in, use some thin (I mean THIN!) wire to connect the two pins to the respective PCB track.

[phantomEVO]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

don't you see that there arent pcb track???

[ben7]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

don't you see that there arent pcb track???

Well then, your motherboard is trash.

[domas]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

where are the supposed to be connected to then??
they have to go somewhere. do you have schematic for it??

[Learn2Day]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

where are the supposed to be connected to then??
they have to go somewhere. do you have schematic for it??

Good point! Might not be an easy re-routing it, but following the schematics you can wire them from another component.

Funny how the obvious escaped most of us..

[phantomEVO]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

i havent schematic: please help me

[Uniballer]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

If there is no trace, and no via, then the pin may not be connected to anything. Check the data sheet for the part to see if that makes sense.

[brethin]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

i havent schematic: please help me

Get schematic then use really small wire to jumper to pins where pads are missing. Other than that buy a new motherboard and be more careful from now on.

[phantomEVO]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

please help me to find schematic

[Francisco.s]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

please help me to find schematic

Have a look to this boardview.
You will need TSICT.exe to open the *.bom files.

[phantomEVO]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

wherecan i download this TSICT? i don't find any working link!

[phantomEVO]

Re: [help]ASUS F5SL MOTHERBOARD: SOLDER PIN!

i've opened this boardview with tsict...(this program has a strange translation with a lot of "????" and not word...however i've opened the file and so?