Announcement

Collapse
No announcement yet.

dag37amb8d0 rev d no +3.3vs5

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    dag37amb8d0 rev d no +3.3vs5

    hi everyone
    i have dag37amb8d0 rev d hp mother board.i havent +3.3vs5 pu2001
    5 pin have 3.3v
    1 pin 0v
    2pin 0v
    8pin 20v
    when i remove bios chip +3.3vs5 coming.
    i changed i/o an reprogram
    i changed pu2001

    when i pres on/off buton dc jack led blink 1 time

    whats my problem

    Mod Edit - attached schematic removed.
    Reminder: rules and organization of this section - https://www.badcaps.net/forum/showthread.php?t=117483
    Last edited by Vesko356; 09-13-2023, 12:46 PM. Reason: Attached schematic removed.

    #2
    Re: dag37amb8d0 rev d no +3.3vs5

    check AD_ID

    Comment


      #3
      Re: dag37amb8d0 rev d no +3.3vs5

      i checked already0.6v

      Comment


        #4
        Re: dag37amb8d0 rev d no +3.3vs5

        Originally posted by trmrtts View Post
        hi everyone
        i have dag37amb8d0 rev d hp mother board.i havent +3.3vs5 pu2001
        5 pin have 3.3v
        1 pin 0v
        2pin 0v
        8pin 20v
        when i remove bios chip +3.3vs5 coming.
        i changed i/o an reprogram
        i changed pu2001

        when i pres on/off buton dc jack led blink 1 time

        whats my problem
        dc jack led ok

        Comment


          #5
          Originally posted by trmrtts View Post
          Re: dag37amb8d0 rev d no +3.3vs5

          i checked already0.6v
          0,6v on AD_ID is low. about 120W charger there should be aroun 1.8V
          see solution on
          Technical discussions covering any type of laptop, notebook, netbook, tablet, or smartphone. Any and all brands and models welcome. When starting a new thread, please put the make AND model of your device in the thread title. Also be VERY descriptive of your issue, that way you'll get the best answer possible!

          Comment


            #6
            AFAIK, 3v will rise only after power button press.

            Comment

            Working...
            X