Repair Fence Energizer SS-1000E Fi-Shock

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • redwire
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    I don't think they kill, otherwise dead cows, horses... but it does have a 20 mile fence range and burns through weeds and grass. Hmm.

    Leave a comment:


  • stj
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    maybe the owner is still lying on the floor waiting to be discovered - with his working charger!!

    Leave a comment:


  • ron350
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    What ever happened with this electric fence box?

    Leave a comment:


  • stj
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    i have seen the age BS a few times recently, it's jewtube's AI algorythm applying it based on the descriptions.
    unfortunatly in this case the description includes the word "suicide"

    Leave a comment:


  • eccerr0r
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    All three, Bigclive, DiodeGoneWild, and ElectroBoom have nutty videos...

    That second one clip has an age restriction on it too. I'm going to pass on it though I thought I seen it before (meaning, the restriction was added later or this was an edit to an old version.) Same reason for passing: no need for even more pinpointed tracking...

    Leave a comment:


  • stj
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    not bad,
    but you also need this guy.
    https://www.youtube.com/watch?v=Jf8ygFJtOCg

    https://www.youtube.com/watch?v=SB62AfXLEHY

    Leave a comment:


  • stormy1777
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    Originally posted by eccerr0r
    No, no no...We don't need Bigclive to test one. We need ElectroBOOM to test one
    oh dear, oh dear, was not aware of this guy, I'm still crying from laughter:

    https://www.youtube.com/watch?v=CoxHOHYz1_k

    and definitely feel a lot better about my mishaps thus far

    Leave a comment:


  • stormy1777
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    Originally posted by stj
    I'm trying to find the right HTML tags to wire it to this thread using PoE (power over ethernet , anyone posting should feel some jolt depending on their distance from the main servers

    Stormy
    PS: Yeah, Internet is not the same as Ethernet, darn, it could work you know if you didn't point that out!!!

    Leave a comment:


  • eccerr0r
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    Originally posted by stj
    No, no no...We don't need Bigclive to test one. We need ElectroBOOM to test one

    Leave a comment:


  • stj
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    not testing it fully then?
    https://www.youtube.com/watch?v=iDJp2tHmEQo

    Leave a comment:


  • petehall347
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    a spark should jump across the electrodes when its working . best test is set up in the field and touch the fence .

    Leave a comment:


  • stormy1777
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    Originally posted by stj
    and on a related subject, how do you intend to test this device?
    good question:

    test1: see if NEON yellow light turns ON.

    test2: measure Volt difference between the two external rods.

    test3: short them for a split second?? like this maybe: https://www.youtube.com/watch?v=-ncPc8iNmyU

    test4: take it to the fence and hook to wires, and see if it works

    Stormy.

    Leave a comment:


  • stormy1777
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    Originally posted by eccerr0r
    Keep in mind, 600KΩ is near the resistance of sweaty human fingertips from hand to hand, and that's why it's dangerous to touch live voltages...
    If u ask me, it's also dangerous touching a failed resistor; why? b/c I've just embarrassed myself

    You probably know the rest, but I'll spell it out for those interested!!

    I was measuring my own "sweaty hands" as was struggling to make good contacts with the loose resistor now re-testing over and over, it is OL for sure, no nothing, just ===dead=== cut wire or burnt or something..

    Thanks for the remark, learning a lot

    Stormy.
    PS: Do they give forum points for honesty ? at least you got a good laugh

    Leave a comment:


  • stj
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    and on a related subject, how do you intend to test this device?

    Leave a comment:


  • eccerr0r
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    Keep in mind, 600KΩ is near the resistance of sweaty human fingertips from hand to hand, and that's why it's dangerous to touch live voltages...

    Leave a comment:


  • stormy1777
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    Originally posted by eccerr0r
    Probably safer to replace one at a time since you're dealing with not-exact matches.

    Anyway no point in replacing the other resistor - resistors usually aren't 'wear' items unlike capacitors...
    I was thinking to keep things more 'in balance', but I'll go with that and replace just one with 350 Ohm and see if that works. at this point it's also for educational purposes, sure can order, but that will take few days, until then, folks here are eager to see it work again, farmers are lovely people you know

    I think tomorrow we'll know

    Thanks folks!!

    BTW: tested the existing/good shows exactly 360 Ohm, the bad one, shows upwards to 600K Ohm, and sometimes 1M Ohm, and sometimes OL so, it's bad
    Stormy.

    Leave a comment:


  • budm
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    RJ already done the research for you and found the resistor for you so why not order two of them and just replace them.

    Leave a comment:


  • eccerr0r
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    Probably safer to replace one at a time since you're dealing with not-exact matches.

    Anyway no point in replacing the other resistor - resistors usually aren't 'wear' items unlike capacitors...

    Leave a comment:


  • stormy1777
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    found another with 350 Ohm / 10W, i think that is close enough to try replacing both

    Leave a comment:


  • stormy1777
    replied
    Re: Repair Fence Energizer SS-1000E Fi-Shock

    Originally posted by stj
    smash the faulty one open and check, they arent always wirewound.
    OK, took the advice, and it seems like wirewound. Searching I've found THREE very similar resistors, pair of 470 Ohm 390Ohm, 330 Ohm, all 10W, the question is it going to work with either one? probably not want to mix the existing 360 Ohm...

    any thoughts welcomed, that would be an instant fix, no need to ship anything

    Stormy
    Attached Files
    Last edited by stormy1777; 06-03-2018, 03:14 AM.

    Leave a comment:

Related Topics

Collapse

  • jshhh
    Help repairing Yamaha RM1X synthesizer/groovebox - PCB trace for capacitor has been pulled off
    by jshhh
    Hi guys,

    I've been trying to restore this Yamaha RM1X groove-box I bought, and the first thing on my agenda was to replace a bad capacitor that was making it so that the screen was super dim. As I'm a complete novice I went and accidentally pulled off one of the trace pads for the SMD capacitor as I was removing it, pulling up some of the green PCB with it. I've been trying to repair it by gluing down copper tape from where it began to pull off and solder the capacitor on after...atm I've just been attempting to do the same kind of thing on rubbish PCBs I got at a recycling place,...
    03-26-2025, 07:05 PM
  • Xiran
    Macbook A1502 820-3476-a don´t turn on (measures included)
    by Xiran
    Hi to all:


    I have a Macbook pro model A1502
    Board 820-3476-a

    Liquid damage, cleaned with isopropyl.

    Don´t boot in SMC Bypass, it tries to turn on without luck (check voltages, for example 5v usb intermittent).


    I have two chargers, one is an original apple magsafe 85w 16.5-18.5v 4.6a max. And 60w generic clone.

    Sometimes Stays with orange light, fan OFF. No heat.

    Measures:

    CLONE:

    ppbus_g3h 12.55v
    PP3V42_G3H 3.41v
    PPVRTC_G3H 3.33v
    PP5V_S5 5.02v
    PP5V_S3...
    12-23-2023, 02:10 PM
  • Benass
    GigaByte Radeon Rx5700xt 8gb VDDCR_GFX_PWR_GOOD Signal is missing.
    by Benass
    This will be a headscratcher. I don't know how to break it down to a readable topic.
    Im troubleshooting Rx5700 GPU. Core voltage missing.
    I have schematics and Boardview.

    I'm currently troubleshooting a power management setup that involves the IR35217M and NCP81022 chips. I've encountered some issues specifically with the SM_ALERT#, SM_DIO, and SM_CLK pins, and I'm hoping to get some insights or suggestions from those who might have experience with these components. Current Observations:
    • The SM_ALERT# pin is active (pulled low), indicating a potential fault condition.
    ...
    10-11-2024, 01:58 PM
  • ohren
    Original Xbox 1.0 PSU: Foxlink FTPS-0002 Rev. B. — 12 V low, 5 V high — transformer?
    by ohren
    Hello!

    I'm looking at an original Xbox PSU: Foxlink ftps-0002 rev. B. The 12 V output is too low, and the 5 V output is too (?) high. Unfortunately I don't have an oscilloscope but only a DMM for diagnosis.

    Measured voltages with no load:

    After rectifier diodes
    12V: 6.17 V
    5V: 5.67 V

    Secondary transformer pins AC measurement (really don't know if this says anything)
    12V: 2-2.5 V
    5V: 1.04 V


    I also have another (working) Xbox psu from Delta. The same measures there, in order, being: 10.79,...
    03-18-2023, 10:33 AM
  • seppde
    AMD Desktop Kit - no display, no POST (?)
    by seppde
    Hey,
    I've recently sold a PC and (trying to reduce e-waste) told the buyer to bring me his old setup, and I'd take a look at it. Recently I've been trying to repair laptops, mainly, with so-so results.
    I'm now looking at an AMD Desktop Kit with no display. Apparently this board reuses (possibly defective) Playstation 5 chips 4700s. It does not provide an internal GPU, or better say in any case it doesn't provide an output for the internal GPU.

    There was one obvious fault: One of the caps of the CPU power rail was missing, that happened when the previous owner was changing...
    12-03-2024, 12:09 PM
  • Loading...
  • No more items.
Working...