Xiran
Member
Last Activity: 05-28-2025, 09:30 PM
Joined: 01-16-2019
Location: Mexico
-
Ok! thx for your answer [B][URL="https://www.badcaps.net/member/277059-truclacicr"]truclacicr[/URL][/B]!Ok! thx for your answer [B][URL="https://www.badcaps.net/member/277059-truclacicr"]truclacicr[/URL][/B]!Ok! thx for your answer [B][URL="https://www.badcaps.net/member/277059-truclacicr"]truclacicr[/URL][/B]! -
Wow!
To to all for answer!
So, it´s a CERAMIC FILTERS 10.7MHz, i´ll check for it, if i put a 6.7468 MHz, will work? i´ll try itLeave a comment:
-
Somebody knows the value of this osc in one rf receiver?
Hi to all!
I want to know, if somebdy know the value of this osc/resonator.
In another receiver, it uses a 6.7468
Thx in advice!... -
I put an extra button to power on/off the macbook, because like you say, it didn't work the power buttonLeave a comment:
-
D7005 with only power adapter:
Pin1: 16.58v
Pin2: 12.53v
Pin3: 16.33v
D7005 with only battery:
Pin1: 0.03v
Pin2: 12.51v
Pin3: 12.33v...Leave a comment:
-
D7005:
Pin1: 16.58v
Pin2: 12.53v
Pin3: 16.33v...Leave a comment:
-
Thx for answer!
Tomorrow i´ll check, and post results.Leave a comment:
-
Macbook pro a1502 works, but not after a power off, then power on
Hello again!
I have a macbook pro a1502, which works without problems, the problem comes when I turn it off completely, and try to turn it on, the only way is to disconnect the battery and charger, I reconnect the battery and the charger, and only then does it turn on. I already reset the smc, but the fault persists... -
Thx!
I´ll check it, one question, did you have the commands to do it without desolder and resolder the chip? I´ve do this around 50 time or more in my board testing diferent bios... =(...Leave a comment:
-
Can I ask you a favor? Could you take a photo of your battery from the front and back?
Thanks in advance....Leave a comment:
-
I have exactly the same card, what is the advantage of using it with clean ME?...Leave a comment:
-
Hi @rensonpineda,
You can check right here, there are dumps of what you ask for. But if it is shorted, you have to unsolder it, and check it, if it is the integrated one, you will have to change it....Leave a comment:
-
Force macbrtool to flash
Hi to all!
Are there a way to force macbrtool to do a flash? -
Macbook A1502 820-3476-a sub board brd please
Hi to all:
I have a Macbook pro model A1502
Board 820-3476-a
But internal wifi doesn´t work...
I´ve test another wifi card, another sub board, withuot luck...
I want to check if wifi pins are ok with principal board.
I want to know, if somebody have the brd and sch file and if want to share with me.
Thx in advice...Last edited by Xiran; 01-15-2024, 05:23 PM. -
Excuse me,
Does anyone know if there are any missing components here?
I'm starting to think that something is missing here, and that's why it won't let me update the original bios......Last edited by Xiran; 01-10-2024, 10:12 PM.Leave a comment:
-
Ok, here comes god news, with this file i can install high sierra (with apfs driver dxe), but doesn't detect wifi card......
Leave a comment:
-
Excuse me peste, but it don´t have the apfs driver... =(...Leave a comment:
-
Thx for answer peste!
ARe there some efi Shell Commands to do the task? For not desolder and resolder the chip... =(...Leave a comment:
-
Hi friends!
I have:
Apple MacBook Pro A1502 (820-3476-A)
Board-id: Mac-189A3D4F975D5FFC
serial C17NX5F8G3QH
EFI update please?
I put the next firmware updated, but no constant power on......Leave a comment:
-
Hi to all!
Can be posible, to do an efi firmware update manually? I've tried with Apple app without luck...
It's an a1502
0138.b15.150605072
I have a macbookpro11,1 who i revive from a water damage, i can use macos sierra normal from usb, but i can't install high sierra (yes, the firmware is not updated), somebody sells me, without turning on (only for pieces), but actually, i hopefully repair it, but don´t include the original ssd... =(, so i put an adapter.
i´ve tried to update directly the firmware with MACBRTOOL_V1.0.0_IMG, but no luck...
...Last edited by Xiran; 01-04-2024, 11:00 PM.Leave a comment:
No activity results to display
Leave a comment: