I do rename it to .bin and used FD44Editor ! to put seial number ,system UUID and primery card MAC ...I need the system UUID and address MAC!?I need to put those information on BIOS to flash it ! so I need backup .bin of x470 to copy info with FD44Editor , and past it in new BIOS.
Are you using a sop8 clip or have you desoldered the chip.Desoldering it is the most reliable way. If you do manage to make a backup post it here.Check the backup with a hex editor,it may look empty, as in all FF`s but scroll down further and there should be code.An AMD bios has a different layout to intels,there`s no flash descriptor or ME region.
FD44editor can only add to one area,and the info is usually stored in more than one place,you need to use UEFITool and a hex editor to do it right.
thanks ,I tried both there is no chip mx25u25645gz4 ! I used RT809F another programer
and it's work fine
I read the chip first , I found the bios 4012 was on motherbord I took the address MAC and system UUID with FD44Editor to convert the new BIOS, just there is no post same problem no boot ! I tried many bios version ! and same problem after flashing! everything work fine ram ,cpu,gpu... ! and no boot even the keybord and mouse didn't light up!
Comment