hp prodesk 600 g1 original bios

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • Otakon
    New Member
    • Jan 2022
    • 1
    • Belarus
    #41
    Good day to all. Have a problem. My HP ProDesk 600 G1 SFF suddenly stopped working. In the end repairman flash bios new bios from HP support with programmer. Now PC works. But now I have error 'The device cannot start. (Code 10)" on LAN adapter, and MAC in BIOS was all FF.
    Here is current BIOS and backup of original.
    Have 3 stichers, but there is noa any MAC on them. Only BIS, Serialt No. CZC4243ZTH and Product No.

    I tried copypaste Gbe block from old bios to new, but after flash via usb FF MAC still here. Is Gbe block promram only with manual flash of bios flash, and not flash via dos/bios?
    Attached Files
    Last edited by Otakon; 01-04-2024, 01:38 AM.

      Comment

      • hoaca388
        #41.1
        hoaca388 commented
        01-03-2024, 07:50 AM
        Editing a comment
        serial number ?
      • hoaca388
        Badcaps
        • Jan 2022
        • 11254
        • Viet Nam
        #42
        Originally posted by Otakon
        Good day to all. Have a problem. My HP ProDesk 600 G1 SFF suddenly stopped working. In the end repairman flash bios new bios from HP support with programmer. Now PC works. But now I have error 'The device cannot start. (Code 10)" on LAN adapter, and MAC in BIOS was all FF.
        Here is current BIOS and backup of original.
        Have 3 stichers, but there is noa any MAC on them. Only BIS, Serialt No. CZC4243ZTH and Product No.

        I tried copypaste Gbe block from old bios to new, but after flash via usb FF MAC still here. Is Gbe block promram only with manual flash of bios flash, and not flash via dos/bios?
        AAAAAAAA
        Attached Files
        ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
        Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------

          Comment

          • Alexandra Cissandra
            New Member
            • Mar 2024
            • 1
            • Pakistan
            #43
            Originally posted by Graku
            Re: hp prodesk 600 g1 original bios

            Thank you so much for everything,

            I just tried it and it works. The only problem I have now is that I don't have a MAC in the BIOS. Everything comes out f

            Does anyone know how to edit the MAC on the Prodesk 600 G1?

            I appreciate any help.
            hp prodesk 600 g1 twr original bios after i flash the bios chip with the bios from hp site mac address became ff:ff:ff:ff:ff:ff and the ethernet doesnot work

              Comment

              • bembeno
                Badcaps Veteran
                • Feb 2016
                • 307
                • egypt
                #44
                HP 600 G1 TWR take along time to turn on
                serial no CZC4221V9D
                PRODUCT NO C8T90AV​
                Attached Files

                  Comment

                  • hoaca388
                    Badcaps
                    • Jan 2022
                    • 11254
                    • Viet Nam
                    #45
                    Originally posted by bembeno
                    HP 600 G1 TWR take along time to turn on
                    serial no CZC4221V9D
                    PRODUCT NO C8T90AV​
                    HP ProDesk 600 G1 Base Model Tower PC
                    Attached Files
                    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
                    Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------

                      Comment

                      • bembeno
                        Badcaps Veteran
                        • Feb 2016
                        • 307
                        • egypt
                        #46
                        not working ( the file i attached work but take along time and sometimes it restart for 4 times until working )

                          Comment

                          • byhabit
                            Pozitif
                            • May 2016
                            • 7
                            • istanbul
                            #47
                            HP PRODESK 600 G1 DM BUSINESS PC
                            REGULATORY MODEL: TPC-F064-DM
                            SN: CZC5361S3X
                            There is a password in the BIOS of the device.
                            Original bios is attached
                            Can you help me?
                            Attached Files

                              Comment

                              • harounHD
                                Member
                                • Feb 2017
                                • 37
                                • Algérie
                                #48
                                greetings everyone got a hp prodesk 600 g1 sff no display with 4 beeps with fan spining fast ram issue replaced the ram still same issue . voltages are fine
                                here is the backup bios file sn czc4223pqb
                                Attached Files

                                  Comment

                                  Previous 1 2 3 template Next

                                  Related Topics

                                  Collapse
                                  • ianasystems
                                    Need Help Restoring BIOS and MAC Address for HP ProDesk 600 G1 SFF
                                    by ianasystems
                                    Hello,

                                    I'm currently dealing with a BIOS corruption issue on my HP ProDesk 600 G1 SFF desktop PC.

                                    After the BIOS got corrupted, my PC was showing no display, and I had to take it to a repair shop where the technician removed the BIOS chip from the motherboard and installed a BIOS I provided from a file I downloaded from the official HP website.

                                    While the display issue was fixed and the system is powering up again, there's one major problem: the Ethernet MAC address is now showing as FF:FF:FF:FF:FF:FF, indicating that it's been wiped or corrupted as well....
                                    04-16-2025, 02:04 PM
                                  • Vesko356
                                    [Guide] How to find the right HP bios version to flash
                                    by Vesko356
                                    First of all thanks to all of our members who have posted previously all methods posted here.
                                    Please leave a comment if you find something new,or have anything else to add.
                                    -----------------------------------------------------------------------------------------

                                    Find by serial number,model number or series

                                    If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
                                    Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
                                    Operating system and OS version.If...
                                    08-11-2023, 03:27 AM
                                  • beBoss
                                    HP ProDesk 400 G6 mini - BIOS Password attempt to remove it
                                    by beBoss
                                    Hi,

                                    as noobie to this please excuse my lack of experience.

                                    I am trying to remove a BIOS password from this machine:
                                    HP ProDesk 400 G6 Mini

                                    but so far I still have no success.
                                    I bought CH341 programmer and decided to give it a try.

                                    The programmer came with 8 pin cables and connectors or whatever everything else is called so I had to buy a new 16 pin cable because the chip which I think is the BIOS is with 16 pins..



                                    I connected everything and downloaded AsProgrammer and NeoProgrammer then installed drivers...
                                    05-30-2024, 12:48 PM
                                  • zenius
                                    [REQUEST] Dell G3 3579 BIOS Password & AMI Protected Range/BIOS Guard Unlock
                                    by zenius
                                    Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.

                                    Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...
                                    12-08-2024, 06:13 AM
                                  • TraJikar Mac
                                    [HELP] G712LWS BIOS capsule
                                    by TraJikar Mac
                                    I need someone that can capsulate one of the bios files below, and i prefer the older bios version so i can flash it using CH341A tool into the bios chip.
                                    The manufacturer BIOS files are bigger than the BIOSbackup1.bin files by 256KB and I don't know how to fix or recompile it.

                                    You can see in this link a conversation between me and other people (Starting at page 10) who tried to help me (thanks to their efforts), but i still couldn't fix it and the laptop is considered as dead until now.

                                    Also, I uploaded a backup file for the bios that I extracted by using CH341A...
                                    06-11-2025, 01:35 PM
                                  • Loading...
                                  • No more items.
                                  Working...