hp prodesk 600 g1 original bios

[Otakon]

Good day to all. Have a problem. My HP ProDesk 600 G1 SFF suddenly stopped working. In the end repairman flash bios new bios from HP support with programmer. Now PC works. But now I have error 'The device cannot start. (Code 10)" on LAN adapter, and MAC in BIOS was all FF.
Here is current BIOS and backup of original.
Have 3 stichers, but there is noa any MAC on them. Only BIS, Serialt No. CZC4243ZTH and Product No.

I tried copypaste Gbe block from old bios to new, but after flash via usb FF MAC still here. Is Gbe block promram only with manual flash of bios flash, and not flash via dos/bios?

[hoaca388]

serial number ?

[hoaca388]

Good day to all. Have a problem. My HP ProDesk 600 G1 SFF suddenly stopped working. In the end repairman flash bios new bios from HP support with programmer. Now PC works. But now I have error 'The device cannot start. (Code 10)" on LAN adapter, and MAC in BIOS was all FF.
Here is current BIOS and backup of original.
Have 3 stichers, but there is noa any MAC on them. Only BIS, Serialt No. CZC4243ZTH and Product No.

I tried copypaste Gbe block from old bios to new, but after flash via usb FF MAC still here. Is Gbe block promram only with manual flash of bios flash, and not flash via dos/bios?

AAAAAAAA

[Alexandra Cissandra]

Re: hp prodesk 600 g1 original bios

Thank you so much for everything,

I just tried it and it works. The only problem I have now is that I don't have a MAC in the BIOS. Everything comes out f

Does anyone know how to edit the MAC on the Prodesk 600 G1?

I appreciate any help.

hp prodesk 600 g1 twr original bios after i flash the bios chip with the bios from hp site mac address became ff:ff:ff:ff:ff:ff and the ethernet doesnot work

[bembeno]

HP 600 G1 TWR take along time to turn on
serial no CZC4221V9D
PRODUCT NO C8T90AV

[hoaca388]

HP 600 G1 TWR take along time to turn on
serial no CZC4221V9D
PRODUCT NO C8T90AV

HP ProDesk 600 G1 Base Model Tower PC

[bembeno]

not working ( the file i attached work but take along time and sometimes it restart for 4 times until working )

[byhabit]

HP PRODESK 600 G1 DM BUSINESS PC
REGULATORY MODEL: TPC-F064-DM
SN: CZC5361S3X
There is a password in the BIOS of the device.
Original bios is attached
Can you help me?

[harounHD]

greetings everyone got a hp prodesk 600 g1 sff no display with 4 beeps with fan spining fast ram issue replaced the ram still same issue . voltages are fine
here is the backup bios file sn czc4223pqb