After updating BIOS to:
HP EliteDesk 800 G2 TWR/SFF
02.42 Rev.A 17.2 MB 12. sep 2019
corrupted the bios.
Thanks
HP EliteDesk 800 G2 TWR/SFF
02.42 Rev.A 17.2 MB 12. sep 2019
corrupted the bios.
Thanks
-
-
HP EliteDesk 800 G2 BIOS corrupted by HP bios update
After updating BIOS to:
HP EliteDesk 800 G2 TWR/SFF
02.42 Rev.A 17.2 MB 12. sep 2019
(link: https://ftp.hp.com/pub/softpaq/sp990...00/sp99042.exe)
It finished flashing and rebooted - Does not POST at all.
- Tried trick with Win key + B and power to recover.
- Tried remove CMOS battery
- Tried pressing CMOS button for 10 seconds
Nothing of these helps.
When taking power and draining remaining power, and then applying power again it do the following:
RED power light and beeps 2 long and 4 short.
By the way, the bin file is 9 MB in size.
Thanks for any helpLast edited by GIFixed; 10-01-2019, 08:00 AM. -
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
Post your bios backup .Comment
-
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
Can't you dump your faulty bios? You can use that faulty bios and file from HP and combine them. When it's working, you might have to use dmifit tool to insert dmi information.Comment
-
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
I will try to dump the BIOS chip using TL866 programmer.
The windows HP bios update tool did take a backup of my bios. Its size is 9 MB. Same size as in the update tool.
Then this should be not a full backup and useless, do you agree?
By the way, I would like to learn how to edit/combine/fix bios files. Is there a good toturial?Last edited by GIFixed; 10-02-2019, 02:57 AM.Comment
-
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
The 9MB file is the bios region,its the only part that gets flashed and backed up.The rest of the bios is locked,the flash descriptor and ME region.See the description here:
https://winraid.level1techs.com/t/gu...lization/31277
You can overwrite the bios region using a hex editor ,such as HxD .https://mh-nexus.de/en/hxd/Comment
-
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
By the way,
Any body knows why there are two flash chips in this machine:
1) 25Q64FVSIQ near the Nuvoton NPCD315HA0DX
2) 25Q128FVSQ near Infenion SLB9670 and the E16 header marked "ROM RCVRY".
The E16 header is not populated (no pin header soldered).
Could not find any pinout of this E16 2x5 pins header. Pin4 is key.
Other HP models uses 8-pin recovery header with to CS# pins tied together by a jumper. What I could see on videos/tutorial you disconnect this jumper and attach external programmer directly to this header for dump and flashing bios without desoldering.
Any help on this one?
Is it possible to dump the full BIOS without desoldering on this machine. And without harming any other components?
It seems this machine is still under warranty, but HP demands the purchase invoice to correct warranty expiration date. We are seeking to find the invoice. Until now not succeeded to find it.Attached Filesif you find these attachements useful please consider making a small donation to the site
Last edited by GIFixed; 10-06-2019, 04:45 AM.Comment
-
-
-
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
There are soic8 clips so there is no need to unsolder most of the times.Comment
-
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
Yes, thanks, I am aware of that SOIC8 clip. But with this particular machine, does it fry the EC?
KvnTM told me before in another thread regarding Yoga 2 pro, that using a clip will fry the EC.
Is there a way or a rule to determine, if there are possibilities to destroy the EC or another components by flashing BIOS onboard using clip or direct connect?Comment
-
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
It will not fry any EC. You just have to use the correct voltage. If it is a 1.8V eeprom, use 1.8V programmer. If it is a 3.3V eeprom, use a 3.3V programmer.
Winbond eeprom with FV in the model is 3.3V. If it is FW instead, it is 1.8V.Comment
-
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
Nobody has an answer to why there are two flash chips on this elite desk 800 g2 model?Comment
-
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
One is main bios, other is EC bios.Comment
-
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
Try flashing clean main bios first, then you will know.Comment
-
Re: HP EliteDesk 800 G2 BIOS corrupted by HP bios update
hi,
HP EliteDesk 800 G2 main, bios pleaseComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
HP EliteDesk 800 G2 MINI/DM (1L PC)
I have 40 of these units. All of which i tried to update bios with HP's utility got bricked. All of them were bios password locked, i used the jumper thing to reset it. Couple updated bios, one of which worked fine for _ONE_ boot. Second is now mixed with rest, i don't know which it is specifically so have not retested it.
All had some MESpilock failed errors on (my) first boot of the unit.
Photo: https://cdn.discordapp.com/attachmen...018_220853.jpg
---... -
Hello everyone, I happen to have a Microsoft Surface Pro X 1876 in my hands. It was brought to me by a friends which happen to have taken off the bios chip to test another motherboard. Upon putting back the bios chip on the original motherboard, The PC is stucked on Windows logo and won t boot to bios or anything. I suspect that the changes of bios chip somehow corrupted the firmware inside. Is the hypothesis correct?
Also i extracted the bios inside the chip which was on Winbond 25R128JWPQ you can find the file attached if you can fix it (if possible, I would like some insight on... -
Hello,
I have a Lenovo Legion S7 15ACH6 that was interrupted during a BIOS update and is now bricked. Symptoms: fans spin, RGB keyboard lights up, but no display/POST.
The BIOS chip is a Gigadevice GD25LR128. I’m using a CH341A with a 1.8 V adapter. In AsProgrammer I selected GD25Q128 (since GD25LR128 isn’t listed) and successfully made a dump (BiosDump2_pf3eg12j.rar).
My understanding is that I’ll need a known good BIOS dump for this exact model, ideally matched to my laptop’s serial number (PF3EG12J), and that the Windows license key/serial should also... -
Hello everyone, I am looking for help as I am struggling to remove lost BIOS Admin password on an HP EliteDesk G6 800 series desktop. I wanted to reset the vPro remote control IP kvm for homelab use.
Here is the hardware identification specs:
HP EliteDesk 800 G6 Desktop Mini PC
Intel(R) Core(TM) i5-10500 CPU @ 3.10GHZ 16384 MB RAM
BIOS ver S21 Ver. 02.05.01 01/05/2021
Born on date: 07/26/2021
SN MXL11841GN
SKU 3X8V9UCHABA
UUID 8116E79EF6FFE94DB0B98A3188270C5C
SYSTEM BOARD ID 8710
SYSTEM BOARD CT NUKBER PJLHQ0A8JF236L... -
Greetings
I am hoping someone could have a check of my Hp Zbook Firefly 14 G10 , 2 x 32MB Bios files... (powers on / black screen).
Serial Number: 5CG3202C16
Product #/SKU: 739P0AV
CT Number: PRTUE00WBI30YX
Description: HP ZBook Firefly 14 inch G10
BuildID: 23WWWGAZ602#SABU#DABU
Feature Byte: 476J6S6b7B7M7Q7U7W7m7saBaEapaqauawbUbhcAfPgSguhKj4jhk8mEn7nVngpDpVpWpnpqprqMqkqz.G3
MAC address not found.- I extracted both 32mb bios files (Main + EC). But when i run the main 32mb bios through MFIT.exe , it produces this error; ie:,
...
Comment