Re: HP Elitedesk 800 G6 lost BIOS admin password

[CODE]- NeoProgrammer message asking for "Choose Microwire Adapter" (this is weird as this chip isn't microwire? but I am a noob so can't tell 100% see photo of programmer setup).[/CODE]

Answering my own question. My CH341a programmer was faulty. I obtained another CH341a programmer and using the same clips it worked at reading and flashing.

Had to use RCUnlocker after to remove the password. Thanks everyone

Re: HP Elitedesk 800 G6 lost BIOS admin password



If I am unable to read/write bios with programmer, is there any windows tool that will accept this unlocked bios and flash it from windows or MSDOS?

SPI Region is blocked for write; so not sure if any Intel BIOS tool will let me take the unlocked dump and overwrite or if i must do programmer then I have to figure out how to solve my issues i mentioned in my post that it won't detect....

Hello everyone, I am looking for help as I am struggling to remove lost BIOS Admin password on an [B]HP EliteDesk G6 800[/B] series desktop. I wanted to reset the vPro remote control IP kvm for homelab use.

[B]Here is the hardware identification specs[/B]:
HP EliteDesk 800 G6 Desktop Mini PC
Intel(R) Core(TM) i5-10500 CPU @ 3.10GHZ 16384 MB RAM
BIOS ver S21 Ver. 02.05.01 01/05/2021
Born on date: 07/26/2021
SN MXL11841GN
SKU 3X8V9UCHABA
UUID 8116E79EF6FFE94DB0B98A3188270C5C
SYSTEM BOARD ID 8710
SYSTEM BOARD CT NUKBER...

Re: New Members - please post your introductions here

Hi all, I have been building computers as a hobby for the past 20 years. My first 10 of those years were due to gaming counter strike, doom and warcraft but for the latter part of the my years primary doing it for homelab and server clusters at home.

Most recently I have started experimenting with BIOS modding and this how I came across this community which seems to have a lot of helpful resources and people.