hi Im getting artifacts, have tried mats mods and card isnt seen, Is there any other programme worth trying?
Thanks
Thanks
-
-
Re: Msi R9 280X Vram Testing help
The cause of artifacts appearing usually dont because of vram error.
But if you need good software for memory testing you shuld check this topic: https://www.badcaps.net/forum/showthread.php?t=84308
For AMD cards testing the best software is tserver.
-
Hello everyone,
I've been encountering some perplexing issues with my ASUS ROG STRIX GTX 1660 Ti Gaming OC and am seeking insights or potential solutions from the community.
Symptoms:
Initially experienced a gradient-style black screen from the top.
Poor performance: ~10 FPS on the lock screen.
Encountered artifacts followed by black screens.
After addressing a PSU-related problem, still observed a performance drop (~10 FPS).
Upon using GPU-Z:
Memory size shows as 0MB.
Unknown bus width and bandwidth reported.... -
Hellow guys,
I have 5 Asus strix 1060 with the same problem. No Singal, MATS Shows in every VRAM Read Errors. and i dont have present VMEM Voltage.
12V Present
5V Present
1.8V Present
PEX Rail 1V
GPU CORE Present 0,7v
VMEM NO Volts
PWM Controller
VCC 5V
EN 3.1 V
VREF 2.1 V
As far as i can understand or is a problem with the memory Controller ( in this case there is no solucion?) or for some reason the vram do not have Voltage. By the way i... -
Acer Nitro 5 LA-H501P GTX 1070
Hi. My laptop was water damaged and many things didn't work. I managed to get it up and working but had problem with GPU and at the end it turned out to be a faulty VRAM (Hynix H5GC8H24AJR-R2c) and I replaced it with (Samsung K4G80325FB-HC25) and it worked sort of. On standard drivers I was able to play fine but once exit the game laptop thrown blue screen “video tdr failure”. When I installed gaming drivers it worked fine ok, but when was running on a battery only was giving me blue screens. I think the problems is due to a wrong Straps... -
I have a card that does post at all, the owner said it does go into windows but it gets stuck on the logo with artifacts, I have no idea if he is lying or not... I tried the card on my pc and it does not post at, no beeps, no bios nothing just all fans turning and nothing else. I tried plugging DVI or hdmi but nothing, I tried unplugging the 8 pin plug from the power supply and it's the same thing.
I just want it to post and get into the bios at least.
Forgive me if I am wrong, but I tested the 3 PCIe 12v power pins on the left(550ohm) and the 4th one from the right 3.3v (400ohm),... -
Here is the website link for this project that I plan on making
https://www.youtube.com/watch?v=atLERDZx0Q8
But I going to use a different enclosure for this project and make it more professional looking and use safety features that was not used in this video
I have some 24 volt switching power supply from my battery testing machine that I modified for a different switching power supply that is more suited for my new application and new purpose for testing BMS protection boards
If can find one that I can modify the voltage output on I have a...09-09-2024, 04:47 AM
Comment