Hellow guys,
I have 5 Asus strix 1060 with the same problem. No Singal, MATS Shows in every VRAM Read Errors. and i dont have present VMEM Voltage.
12V Present
5V Present
1.8V Present
PEX Rail 1V
GPU CORE Present 0,7v
VMEM NO Volts
PWM Controller
VCC 5V
EN 3.1 V
VREF 2.1 V
As far as i can understand or is a problem with the memory Controller ( in this case there is no solucion?) or for some reason the vram do not have Voltage. By the way i found something strange? with the 4 Mosfets of VRAM. 12 v are coming to the drain but they are not passing to the source. Gate is 0 V and Source 0 V also. The gate is conected to the PWM Controller via P_M_UG1_30 ( Pin 2 of the PWM Controller)
The Pwm Controller is a uP9024Q TGH7CB.
These is al the info i got so far, any help please!
Thank you,
I have 5 Asus strix 1060 with the same problem. No Singal, MATS Shows in every VRAM Read Errors. and i dont have present VMEM Voltage.
12V Present
5V Present
1.8V Present
PEX Rail 1V
GPU CORE Present 0,7v
VMEM NO Volts
PWM Controller
VCC 5V
EN 3.1 V
VREF 2.1 V
As far as i can understand or is a problem with the memory Controller ( in this case there is no solucion?) or for some reason the vram do not have Voltage. By the way i found something strange? with the 4 Mosfets of VRAM. 12 v are coming to the drain but they are not passing to the source. Gate is 0 V and Source 0 V also. The gate is conected to the PWM Controller via P_M_UG1_30 ( Pin 2 of the PWM Controller)
The Pwm Controller is a uP9024Q TGH7CB.
These is al the info i got so far, any help please!
Thank you,
Comment