Burnt Hard Drive Board Seagte

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • storexxm
    Senior Member
    • Oct 2012
    • 107
    • Vienna
    #1

    Burnt Hard Drive Board Seagte

    Hello Folks.
    I did a stupid mistake and switched power Cable between two different cable select power supplys-
    when turned on the pc smoke and bad small appeard.
    when dissambled board i saw the burnt area-
    can i just shortcut those open bridges?
    is there a chance to repair... or put it into trash?
    i have no idea what part where burnt ;/
    hope someone can help me out-
    greetings
    Attached Files
    Tags: None
    • BL4K3Y
      Member
      • Apr 2020
      • 27
      • England
      #2
      Re: Burnt Hard Drive Board Seagte

      Clean up the board and see how bad the damage is.

      You certainly need to replace some components and some trace rework might also be needed.

      If you don't have any soldering experience, an easier solution would be to just replace the PCB with a new one.

        Comment

        • truclacicr
          Badcaps Veteran
          • Apr 2019
          • 289
          • australia
          #3
          Re: Burnt Hard Drive Board Seagte

          Check for shorted diodes nearby.

            Comment

            • ala_borbe
              aka Donald
              • Apr 2011
              • 1625
              • Malta
              #4
              Re: Burnt Hard Drive Board Seagte

              or find donor board and swap loader eproms
              Im Back... sort of...

                Comment

                • storexxm
                  Senior Member
                  • Oct 2012
                  • 107
                  • Vienna
                  #5
                  Re: Burnt Hard Drive Board Seagte

                  I am just curios if it is possibe to repair...
                  on the easiest way.. just to replace the burnt pieces
                  and look what happens..
                  does someone know whats these are.. ? diods ? resistors..?
                  there are no values where i can look up

                    Comment

                    • noppa
                      Member
                      • Feb 2010
                      • 41
                      #6
                      Re: Burnt Hard Drive Board Seagte

                      This may help

                      http://www.hddoracle.com/viewtopic.php?f=100&t=86

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • federalhouse
                          **Need Help Unlocking BIOS and Hard Drive on Dell Precision 5820 Tower**
                          by federalhouse
                          Hi everyone,

                          I'm in need of assistance with a Dell Precision 5820 Tower. The BIOS is locked with "Dell Security Manager," preventing access to the HDD-1 hard drive.


                          **Background:**

                          I recently purchased this Dell Precision 5820 Tower from a recycler who salvages equipment from abandoned office spaces. The computer was left behind by its previous owner and was password locked. Given that it can run Windows 11, I saw this as an opportunity to upgrade my setup.


                          **What I've Tried So Far:**


                          1. I accessed                          ...
                          1 Photo
                          08-01-2024, 07:03 PM
                        • karto95
                          Repairing a Seagate hard drive with damaged logic board
                          by karto95
                          Hello everyone,

                          I'm currently facing an issue with my Seagate hard drive that has a damaged logic board. I've obtained a replacement logic board from a donor hard drive, but unfortunately, I'm unable to recover the BIOS of the original board due to damaged firmware. I'm wondering if it's possible to make the hard drive work with this donor logic board.

                          I have a CH341A programmer, so I'm hoping that it can be useful in this situation. I've attached the BIOS file .bin of the donor board for reference.

                          If anyone has any suggestions or experience with this...
                          03-21-2023, 04:05 AM
                        • Tynan Dill
                          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                          by Tynan Dill
                          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                          Upon bringing it home and plugging it up, it showed a standby light.

                          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                          The screen seems to blackout and stay black, but with a flashlight I can see the display.

                          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                          Assuming...
                          ORIGINAL POWER SUPPLY BOARD
                          7 Photos
                          11-22-2024, 01:46 PM
                        • tmcw
                          PC case - Hard drive rails
                          by tmcw
                          A friend gave me his old PC case (with MB, and PSU), but no hard drive rails, he said he only used the 2.5" SSD spot inside, and used an external hard drive for data. He said that he'd have a look for the supplied rails, but I doubt he'll find them.

                          So I was wondering if case manufacturers used any type of standard 3.5" hard drive rail?

                          I'm used to the various Dell hard drive caddies or rails (and HP and Lenovo to a lesser extent), or el cheapo cases where you screw through the frame to fix the drive.

                          Now, the case is a CiT Gaming Case, and...
                          05-22-2022, 12:04 PM
                        • sam_sam_sam
                          External hard drive/cd rom enclosure-printer port interface recap power supply board
                          by sam_sam_sam
                          I going to modify the enclosure to except the new USB 3 interface
                          The 3.5 enclosure do not have internal switching power supplies and use a small switching wall wart power supply really

                          I need a cd rom drive for my new computer and do not want to use a 2.5 cd rom drives

                          The switching power supply in the old enclosure has nice heat sinks and has a cooling fan in the enclosure that is the main reason why I want to repurpose for this project

                          https://www.ebay.com/itm/231205428647

                          I will post some pictures of it when I get the usb 3 to IDE...
                          04-08-2023, 05:42 PM
                        • Loading...
                        • No more items.
                        Working...