karto95
New Member
Last Activity: 08-01-2024, 05:20 AM
Joined: 03-31-2022
Location: Catanzaro
-
a520m msi BIOS intermediate versions
Hi everyone, I have a question for you and would like to hear your opinion. My MSI motherboard currently has a BIOS installed from 2020, and there's an updated version available on the MSI website from 2023. I'm wondering whether I should install the intermediate versions with m-flash of the BIOS before installing the latest version, or if I can install the latest version directly. Thank you in advance for your help!Last edited by karto95; 04-04-2023, 03:42 AM. -
Re: Repairing a Seagate hard drive with damaged logic board
I can't extract the firmware, it's probably damaged but I'm not sure, it would have been easier if I had an air soldering iron. The clip is SOP8.
CHIP is 25FS406...Last edited by karto95; 03-21-2023, 08:37 AM. -
Re: Repairing a Seagate hard drive with damaged logic board
I used the clip...Last edited by karto95; 03-21-2023, 06:57 AM.Leave a comment:
-
Re: Repairing a Seagate hard drive with damaged logic board
The issue is that, despite replacing the logic board with an identical one, the PC is unable to detect the hard disk. Although the hard disk powers on, it is not being recognized, leading me to believe that I might be making a mistake somewhere....Leave a comment:
-
Repairing a Seagate hard drive with damaged logic board
Hello everyone,
I'm currently facing an issue with my Seagate hard drive that has a damaged logic board. I've obtained a replacement logic board from a donor hard drive, but unfortunately, I'm unable to recover the BIOS of the original board due to damaged firmware. I'm wondering if it's possible to make the hard drive work with this donor logic board.
I have a CH341A programmer, so I'm hoping that it can be useful in this situation. I've attached the BIOS file .bin of the donor board for reference.
If anyone has any suggestions or experience with this... -
Re: Help me please 😭
It looks like a 5v tvs diode, I will pick up the diode online and replace it. thank you very much 😁...Leave a comment:
-
Help me please 😭
hi guys, someone is kind enough to help me understand which diode is the one circled, it is part of an old maxtor hard drive, it blew up and I couldn't find any the scheme and not even to understand what diode it may be.... -
Help with schematic of DIAMONDMAX 10
Hi, I have a diamondmax 10 hard drive, exactly model 6v160e0. His logic board is 302136100. I need the schematic. Thanks in advance to whoever will be able to help me. -
Re: New Members - please post your introductions here
Hi, I'm passionate about electronics. It looks like a very interesting communityLeave a comment:
No activity results to display
Leave a comment: