Re: packardbell en lx86 bios need
Is the attached what you are looking for?...
BL4K3Y
Member
Last Activity: 10-25-2021, 11:16 AM
Joined: 04-03-2020
Location: Colne, Lancashire
-
Re: Burnt Hard Drive Board Seagte
Clean up the board and see how bad the damage is.
You certainly need to replace some components and some trace rework might also be needed.
If you don't have any soldering experience, an easier solution would be to just replace the PCB with a new one.Leave a comment:
-
Re: Lenovo Yoga 530
With the SSD removed, does the laptop boot straight in to the BIOS and remain on the BIOS screen or does the system keep rebooting itself?
How many memory modules are installed?
Have you tried running Lenovo Diagnostics?Leave a comment:
-
Re: Extend Dell monitors result Vertial+Horisontal
Try holding the [B]CTRL + ALT + UP[/B] keys together to rotate the screen back to normal.
If this doesn't work, check the graphics control panel to see if you can rotate the display from there.Re: Extend Dell monitors result Vertial+Horisontal
Try holding the [B]CTRL + ALT + UP[/B] keys together to rotate the screen back to normal.
If this doesn't work, check the graphics control panel to see if you can rotate the display from there.Re: Extend Dell monitors result Vertial+Horisontal
Last edited by BL4K3Y; 11-28-2020, 07:50 AM.Leave a comment:
-
Re: Thinkpad T440P turn on abut 5 seconds only
You said that the laptop remains powered on if you remove the RAM.
Did you test different RAM?Leave a comment:
-
Re: LENOVO b570e
Is the attached file what you are looking for?...Leave a comment:
-
Re: Request for bios acer m3970
There are BIOS updates for Windows and Linux.
I have attached both for you because I don't know which OS you are using....Leave a comment:
-
Re: Dell Latitude 3400 bios password -E7A8
I can't find a free way to remove the BIOS password on your laptop.
Your laptop is showing warranty with Dell until 2023, so contact them and they should be able to help you.
They can probably send you a code or something to remove the password once you provide proof of purchase.Leave a comment:
-
Re: MacBook Pro A2159 No Power after new Display
Have you re-connected the damaged screen to the motherboard to see if the device will at least power on?
The Apple T2 security chip on the motherboard might prevent replacement parts from being used, especially if they weren't bought from an authorised Apple reseller, but I have also read that people have been replacing the displays on these devices without issue (we used to replace them at my old workplace, but they were an authorised Apple service centre at the time with access to genuine parts).
With...Leave a comment:
-
Re: Search BIOS HP XW8400
Hi,
Is the attached what you are looking for?...Leave a comment:
-
Re: HP Probook 650 G1
Have you tried a different CPU fan?
If this doesn't work, then the system board has probably failed.Leave a comment:
-
Sharp LC-43CFF6001K Firmware
Hello.
Can someone provide a firmware update for the below TV model please?
TV Model: [B]LC-43CFF6001K[/B]
Screen P/N: [B]LC.4CW02G001[/B]
Motherboard P/N: [B]B16010358 TP.MS6308.PB711 LC430DUY-SHA1[/B]
Thanks in advance.Hello.
Can someone provide a firmware update for the below TV model please?
TV Model: [B]LC-43CFF6001K[/B]
Screen P/N: [B]LC.4CW02G001[/B]
Motherboard P/N: [B]B16010358 TP.MS6308.PB711 LC430DUY-SHA1[/B]
Thanks in advance.Hello.
Can someone provide aLast edited by BL4K3Y; 11-26-2020, 05:10 PM. -
Re: Bush DLED48287HDCNTDFVPY Standby LED Blinking Constantly
I followed the instructions above to obtain the necessary file(s) and I have attached a .zip file.
Thanks....Leave a comment:
-
Re: Bush DLED48287HDCNTDFVPY Standby LED Blinking Constantly
Can you explain how I do this please?
I have gone through the service menu and I can't see any option that resembles what you are asking.
Thanks....Leave a comment:
-
Re: Bush DLED48287HDCNTDFVPY Standby LED Blinking Constantly
Is there something specific you are looking for on the service menu?
I tested the TV again this morning and while everything appears to be working fine, I can't seem to find any HD channels after automatic channel tuning, but SD channels are working fine.
I have tried to factory reset the TV from the menu, but I still can't find any HD channels.
Is there anything I can check to resolve this?
Thanks....Leave a comment:
-
Re: Bush DLED48287HDCNTDFVPY Standby LED Blinking Constantly
I tried again using this image and it worked!
I spoke to Bush technical support earlier who agreed to send me the firmware files, but it looks like I won't be needing them.
Thank you all very much for your help....Leave a comment:
-
Re: Bush DLED48287HDCNTDFVPY Standby LED Blinking Constantly
I tried the reset, but the issue is the same.
I have asked for a firmware image in the request thread.
Thanks....Leave a comment:
-
Re: Eeprom dump thread!
Does anyone have a USB firmware image for 17MB211 (panel: VES480UNDS-2D-N12)?
The TV model is [B]Bush DLED48287HDCNTDFVPY[/B].
Thanks.Re: Eeprom dump thread!
Does anyone have a USB firmware image for 17MB211 (panel: VES480UNDS-2D-N12)?
The TV model is [B]Bush DLED48287HDCNTDFVPY[/B].
Thanks.Re: Eeprom dump thread!
Does anyone have a USB firmware image for 17MB211 (panel: VES480UNDS-2D-N12)?
The TV model is [B]Bush DLED48287HDCNTDFVPY[/B].
Leave a comment:
-
Re: Bush DLED48287HDCNTDFVPY Standby LED Blinking Constantly
The buttons on the TV don't do anything.
If I unplug the TV and plug it back in, I can power it back on using the remote or the power button on the TV.
Thanks....Last edited by BL4K3Y; 04-04-2020, 10:29 AM.Leave a comment:
-
Re: Bush DLED48287HDCNTDFVPY Standby LED Blinking Constantly
I have a picture!
The TV now boots after running the firmware update, but the remote does not respond when the TV is on (I am currently stuck at the language selection screen).
Is there anything I can do to resolve this?
Thanks....Leave a comment:
No activity results to display
Leave a comment: