SiS760GX-MN - not what it appears

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pfrcom
    Oldbie
    • Jun 2006
    • 1230
    • Australia
    #1

    SiS760GX-MN - not what it appears

    eBay impulse buy for a S754 processor

    Although BrandX, it looks well constructed, all Rubycon caps

    Wronggg !!!

    Their sleeves may be purple and gold, but the caps are actually branded Kingcon

    And a "New" board came with a dead CMOS battery

    Act in haste, repent in leisure
    Attached Files
    better to keep quiet and be thought a fool, than to open your mouth and remove all doubt
    Tags: None
    • c_hegge
      Badcaps Legend
      • Sep 2009
      • 5219
      • Australia
      #2
      Re: SiS760GX-MN - not what it appears

      The board probably is new. It's just that the battery is past its shelf life. If it works otherwise, then recap it and replace the battery and you should be good to go.
      I love putting bad caps and flat batteries in fire and watching them explode!!

      No wonder it doesn't work! You installed the jumper wires backwards

      Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

      Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

        Comment

        Previous template Next

        Related Topics

        Collapse
        • hardwareserwis
          Asus Strix G513QR logo appears, then only the backlight stays on
          by hardwareserwis
          Asus Strix G513QR-HF016
          Motherboard: G533-MP-GBM, 6050A3250202-MB-A01

          The motherboard powers on, the Strix logo appears, then only the backlight stays on — it does not enter the BIOS and hangs at that stage.
          The laptop arrived with a broken screen and a damaged display cable.

          Actions performed:
          • New BIOS dumps have been flashed
          • A new Ryzen 7 CPU was soldered in (tested with two different units), but the issue remains the same with both
          • Tested with a different display cable and screen
          • No missing components or visible damage on the motherboard; no components
          ...
          09-29-2025, 01:02 PM
        • Super360
          Samsung/UN65H6300AF LOGO APPEARS AND SHUTS OFF
          by Super360
          Hi as you can see from title, I have a samsung tv here that will show the smart tv logo and then no picture after that even hitting input or menu on remote and shows nothing but the backlight still appears to be on. The tv will turn itself off after a minute or so automatically. I'm somewhat confused if this is either a eeprom problem or a bad led strip problem. The power supply makes a pretty noticeable humming sound when it's turned on leading me to believe one of the leds are shorted but idk honestly. Any of you guys have any help for me? I have a good multi meter and can take pictures of whatever...
          4 Photos
          04-13-2024, 10:05 PM
        • Bob1394
          Vizio M65-C1 | Logo appears for 10 seconds then off
          by Bob1394
          I have used the search, and am stumped.

          My Vizio M65-C1, Vizio logo appears for about 10 seconds then goes off.Power LED blinks 15 times then the TV powers down.

          I have read through many threads on the M65-C1 including the following threads. I feel like I must be looking right past the solution to my problem:
          https://www.badcaps.net/forum/showthread.php?t=81088
          https://www.badcaps.net/forum/showthread.php?t=84241 (not clear on the Eprom actions)


          Observations

          1) [Interaction] Power turned on via TV button (or remote)...
          02-08-2023, 01:03 PM
        • spleenharvester
          Tower T548006 battery, fault on BMS board
          by spleenharvester
          I have two of these spotwash machines. They are portable systems that use a 12V power tool battery consisting of three 18650 cells. One of the batteries recently failed. 12V appears at the terminals but there appears to be a fault condition - machine flashes LEDs when you attempt to power up. When you plug in the battery directly (the machine charges through a USB-C port, but there is a second USB-C port on the battery itself for some reason that can also be used for charging), the green LED lights and a dim red LED lights next to it solid. By comparison, a working battery will flash green only....
          10-04-2025, 06:33 AM
        • ridaKHI
          a320ap20s4lv0.4 appears vertical lines where ever there is text
          by ridaKHI
          I have a problem with my Samsung LCD panel a320ap20s4lv0.4. There appears vertical lines where ever there is text . See my pictures.
          Could this be fixed by cutting some kind of tracks on PCB that drives the LCD panel?
          vgh even vgh odd signal from Shift Register
          and directly connected to panel?
          Thanks for all the help in advance.
          panel: LTI320AP01
          panel PCB a320ap20s4lv0.4
          main board: 090-6M1814-03




          ...
          03-28-2021, 05:55 AM
        • Loading...
        • No more items.
        Working...