Hi all, I am new here and a novice.I have got the LED strips from china and I am ready to install.
I just want to hook this setup with your help. Please see the photos of POWER board and LED board.
Is it ok to connect the red cable from LED Board to the POWER board's DIODE
with 19V.
Is 19V ok or do I have to use STEP DOWN board to drop from 19 to 12V.
There are no marking on this POWER BOARD, so
I want to know where to connect those 2 yellow wire coming from LED board.
Presumable it should be connected to those YELLOW and WHITE points on the
POWER BOARD. Is there any polarity issue with this?
What about the INVERTOR on the POWER BOARD. Does it has to be disable,
if yes then how?
What other modification I have to do to the POWER BOARD or LOGIC Board?
Please have a look at the Boards.
Thanks.
I just want to hook this setup with your help. Please see the photos of POWER board and LED board.
Is it ok to connect the red cable from LED Board to the POWER board's DIODE
with 19V.
Is 19V ok or do I have to use STEP DOWN board to drop from 19 to 12V.
There are no marking on this POWER BOARD, so
I want to know where to connect those 2 yellow wire coming from LED board.
Presumable it should be connected to those YELLOW and WHITE points on the
POWER BOARD. Is there any polarity issue with this?
What about the INVERTOR on the POWER BOARD. Does it has to be disable,
if yes then how?
What other modification I have to do to the POWER BOARD or LOGIC Board?
Please have a look at the Boards.
Thanks.
Comment