I have four HP L1740 monitors that have failed recently. Each has the same problem. Powers up normally, displays (windows desktop) for a couple of seconds and then goes black. I have diassembled three of monitors all three inverter/power boards have blown caps. I am going to order the following caps from mouser.com:
470 uf 50V, 140-ESRL50V470-RC (XICON)
1000 uf 50V, 661-EKY500ELL102MM2 (UNITED CHEMICON).
2200 uf 25V, 647-UPW1E222MHD3 (NICHICON)
1000uf 16V, 647-UPJQC102MPD (NICHICON)
1000uf 25V, 647-UPM1E102MHD (NICHICON)
The inverter/power board p/n is T50P062.00 Rev:2 I have been trying to find any information on these boards, assembly, schematics, etc. Also this is my first attempt at repairing these monitors. If I can repair them, 2 of the 4 monitors are mine to keep. The other two are for company spares.
Hope I am on the right track in replacing these blown caps.
thanks,
George
470 uf 50V, 140-ESRL50V470-RC (XICON)
1000 uf 50V, 661-EKY500ELL102MM2 (UNITED CHEMICON).
2200 uf 25V, 647-UPW1E222MHD3 (NICHICON)
1000uf 16V, 647-UPJQC102MPD (NICHICON)
1000uf 25V, 647-UPM1E102MHD (NICHICON)
The inverter/power board p/n is T50P062.00 Rev:2 I have been trying to find any information on these boards, assembly, schematics, etc. Also this is my first attempt at repairing these monitors. If I can repair them, 2 of the 4 monitors are mine to keep. The other two are for company spares.
Hope I am on the right track in replacing these blown caps.
thanks,
George
Comment