Re: testing dual N-channel P-Channel mosfet in a 8-SOIC package
Get the spec sheet so you can locate the S (Source), D (Drain), and G (Gate) pins.
You use Ohm mode to check for leakage/short between the 3 pins combination, but most common failure mode in these MOSFETs are due to shorts/low reistance reading between S and D.
Get the spec sheet so you can locate the S (Source), D (Drain), and G (Gate) pins.
You use Ohm mode to check for leakage/short between the 3 pins combination, but most common failure mode in these MOSFETs are due to shorts/low reistance reading between S and D.
What would be normal reading for pin D1 & S1 19.60 ohm
D2 & S2 18.32ohm
Re: testing dual N-channel P-Channel mosfet in a 8-SOIC package
Thank you both for great information. By any chance would you guys know where I
can buy P2804HVG and STM4953 dual N-channel P-Channel mosfet in a 8-SOIC package
other then China or Hong Kong.
Comment