Announcement

Collapse
No announcement yet.

LG w1934s 2 second to black

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    LG w1934s 2 second to black

    Hi, i've a problem with my lg w1934s monitor. It's the "famous" 2sec to black... the monitor power light stay on but the backligh disappear... yesterday i opened the monitor and i change the capacitors but the problem persist. I try all the CCFL singly and all of them works... I've made other test for example leave a single CCFL, the monitor turns on and after 2 sec the backlight disappear... what can i do? I've an iron solder and a DMM but i don't know how to use it becouse i'm noob in EE... i can make soldering but i don't know how to use a dmm
    Here there are some pic of board...
    Sorry for my english...
    Attached Files
    Tags: None
    #2
    Re: LG w1934s 2 second to black

    2 seconds to black can be

    a) bad caps
    b) bad inverter transformer (marked in red paint are likely your secondary inverter pins)
    c) bad ccfls
    d) bad ccfl wiring (especially the return wire)

    All are explained starting with post #19 and #20 at (including how to use a multimeter)

    https://www.badcaps.net/forum/showthread.php?t=10419
    Attached Files
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

    Comment

      #3
      Re: LG w1934s 2 second to black

      There are lots of how to use a multimeter videos on youtube. I know, I have probably looked at them all when I first started.
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

      Comment

        #4
        Re: LG w1934s 2 second to black

        ok, thanks for the reply. now i have the tester and i want to check for the 2 red points of transformer. How can i set the dmm? The videos on youtube on post #19 & #20 are not aviable
        Thanks and sorry for my noob

        Comment

          #5
          Re: LG w1934s 2 second to black

          Set the DMM to the 2K ohms scale.

          PlainBill
          For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

          Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

          Comment

            #6
            Re: LG w1934s 2 second to black

            Hi, finally i found the problem... it was a ccfl that has gone... at the moment i broke my replacement... I buy a new CCFL but i must wait 1 month or more... is there any way to "isolate" the CCFL inverter transformer to give power only to the working CCFL? I think that i can use the monitor with 3 CCFL for the moment... Thanks...

            Comment

              #7
              Re: LG w1934s 2 second to black

              Originally posted by rdb89 View Post
              is there any way to "isolate" the CCFL inverter transformer to give power only to the working CCFL?
              Try at your own risk.

              https://www.badcaps.net/forum/showthread.php?t=13713
              --- begin sig file ---

              If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

              We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

              Please do not post inline and offsite as they slow down the loading of pages.

              --- end sig file ---

              Comment

              Previous template Next
              Working...
              X