AOC curved screen - can I fixed it?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rubenlily
    Member
    • Aug 2023
    • 37
    • Sweden
    #1

    AOC curved screen - can I fixed it?

    Can I fix this?





    $20. Seller says she didn't hit it or drop it or press it. She says it might have been injured during transport even though it was in its package and between her legs during the transport.

    Something loose or panel physically damaged?
    Attached Files
    Tags: None
    • R_J
      Badcaps Legend
      • Jun 2012
      • 9557
      • Canada
      #2
      Re: AOC curved screen - can I fixed it?

      The panel is damaged, tell the person you will recycle it if they pay YOU $20.00

        Comment

        • Rubenlily
          Member
          • Aug 2023
          • 37
          • Sweden
          #3
          Re: AOC curved screen - can I fixed it?

          Originally posted by R_J
          The panel is damaged, tell the person you will recycle it if they pay YOU $20.00

          Haha thank you.

            Comment

            • Per Hansson
              Super Moderator
              • Jul 2005
              • 5895
              • Sweden
              #4
              Re: AOC curved screen - can I fixed it?

              Originally posted by Rubenlily
              ...and between her legs during the transport.
              It was obviously too large to fit!

              Okay I'll see myself out
              "The one who says it cannot be done should never interrupt the one who is doing it."

                Comment

                Previous template Next

                Related Topics

                Collapse
                • howardc64
                  Samsung UN55NU7300F Curved TV. Half side backlight out. Fixed by just removing the rear snap cover
                  by howardc64
                  TV was fixed just after removing Samsung's rear snap cover.

                  This curved TV's construction is rather interesting. When the snapped on back is removed, rest of the TV will relax the curvature. Top of LCD panel is loose as it wants to straighten out against the slightly curved bezel. Snapped back provide most of the curvature shape. So just simple disassembly of rear cover will allow the rest of the TV frame to relax its curvature. Thats probably what fixed it but no idea which connection. 4x LEDs are edge lit.

                  Maybe PSU->backlight connector didn't have a good contact?...
                  07-23-2025, 12:34 AM
                • smic717394
                  iphone XS turns off when press on screen.
                  by smic717394
                  Hi,

                  I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                  07-25-2024, 10:16 AM
                • Chrissygizmo
                  Samsung UE55JU6800K half screen dark
                  by Chrissygizmo
                  Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                  I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                  02-10-2025, 12:33 AM
                • spice_disc
                  Vizio TV M50-C1 reboot cycle and static on screen
                  by spice_disc
                  I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                  The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                  1 Photo
                  09-08-2024, 02:37 PM
                • ipatch
                  ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
                  by ipatch
                  i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
                  08-24-2024, 02:36 PM
                • Loading...
                • No more items.
                Working...