Sony STR-DE635 EQ mutes everything

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Xenon-Codex
    Senior Member
    • Jan 2018
    • 186
    • Finland

    #1

    Sony STR-DE635 EQ mutes everything

    I got this thing for free, it has a problem with the Equalitzer-function: it mutes the sound. The previous owner's kid pushed the buttons in random order and the problem appeared. I have done the factory reset, but it did not help.
  • Jolly62
    Member
    • Nov 2021
    • 13
    • Italy

    #2
    Re: Sony STR-DE635 EQ mutes everything

    If the Factory reset didn't solve the issue it may be a DSP issue.
    Try the DSP TEST MODE.
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Comment

    Related Topics

    Collapse

    • masterm
      JVC LT-43C888 (manufactured by Vestel) does not start after trying factory reset, details below
      by masterm
      TV: JVC LT-43C888 (purchased in 2018). This is a smart TV with Netflix, Youtube, Freeview and other applications via 'Viewd' app store

      Problem with TV:
      - Netflix stopped working so i tried to do factory reset from the TV menu.
      - I confirmed on-screen but the factory reset did not happen even. It did not take me to 'first-time installation' screen as mentioned in the manual.
      - After waiting for some time, the TV went into a boot loop.
      - JVC logo comes on the screen and LED light flashes for some seconds, then it reboots again and the same thing happens
      ...
      04-30-2024, 03:03 AM
    • sheffieldyorky
      ZAB/ZAB A,B/ZYJA BLOCK DIAGRAM Acer Aspire
      by sheffieldyorky
      Hey there people
      While working on my Acer Aspire with the OS failing to load, I encountered a motherboard number of DA0ZHQMB6E 0 REV: E. I was getting nowhere fast or slow, for that matter.
      This is what I tried, but not in any order.
      Google
      YouTube
      BIOS
      Command Prompt (administrator privileges)
      >
      On Google AND YouTube, I was getting mixed messages, try this and try that, but when you cross reference the advice it is either the wrong model (even though you enter the correct search term) a YouTube case in point, with the search term "how to...
      10-25-2025, 02:22 AM
    • odie34
      Sony OLED XR-77A80J - 5 Flashes But Turn On After Hard Reset
      by odie34
      I am a hobbyist (not a professional) so please be gentle...

      I recently received an XR-77A80J that wouldn't turn on. (Repeating 5 flashes when plugged in.)

      I did a hard reset by holding the power button for about 30 seconds until the set powered down. I then tried to turn it on and it powered up, bringing me to the setup screen. There's not a lot of detail on the setup screen but the picture didn't have any distortions, so at least a cursory examination suggests no physical damage to the screen. The set appeared to be working normally, but it shut down after about 15 seconds,...
      02-18-2024, 09:11 AM
    • phuzzyday
      Sony KD-70X690E. Started with reset loops.. then it got more complicated. I'm at wits end!
      by phuzzyday
      First of all, thank you everyone who helps others in here! You guys are treasures! Please bear with me, this may be long. I have tried a LOT.

      First, my wife said the TV was turning off and on. When cold it would be fine for several minutes, then it would start resetting.
      I opened it up and noted there are two main lines coming out of the supply besides the backlight., The T-Con 12V line and the main 12V line.
      TRIED 1 - I scoped power coming from Power Supply while it was all still connected. I noted that just before it reset, the 12V line going to the T-Con was going...
      03-26-2025, 05:53 PM
    • mon2
      Hisense 55Q9G Android reset / factory firmware reload
      by mon2
      Hello. Have a 55" Hisense TV that starts to load the Android OS (no backlight issues) -> reaches the app screen where you can view the assorted icons including Netflix and always crashes at the same point just after this launch. If I quickly press the cursor buttons, the cursor can navigate to the settings menu but will power off just after a few seconds of this activity. Do not believe it is power related since the crash is very accurate in the boot cycle.

      After the OS 'crashes', the power does go off and the from white LED goes dark for about 20 seconds and then ON again....
      01-03-2024, 10:25 AM
    • Loading...
    • No more items.
    Working...